Purpose Ankle–foot orthoses (AFOs) are assistive devices prescribed for a number of physical and neurological disorders affecting the mobility of the lower limbs. Additive manufacturing has been explored as an alternative process; however, it has proved to be inefficient cost-wise. This work aims to explore the possibilities of generating modular AFO elements, namely, calf, shank and footplate, with the localized composite reinforcement that aids in the optimization of the device in terms of functionality, aesthetics, rigidity and cost. Design/methodology/approach The conventional lower leg–foot orthosis configuration depends on thermoforming a polymer sheet around a mortar cast with a trademark firmness relying upon the trim-line with the inalienable plan restrictions. In manufacturing of AFO the expert, i.e. orthotist's, guidance is used. Polypropylene and polyethylene material is used in fabrication of AFO to complete all-round reported points of interest over the ordinary outlines, yet their mechanical conduct under administration conditions cannot be effectively anticipated. Findings AFOs made of polypropylene and polyethylene material are available in the market, which are used by children of age 3-5 years. With the existing AFO design, patients are facing excessive heating and sweating problems during long-term usage. After feedback from patients and orthotists (who prescribed AFO to patients), an attempt has been made to solve the problem with a new and improved AFO design of AFO by using finite element modelling and stress analysis. Also, the results indicate that the new design is similar to the actual product design. Originality/value This work introduces the low-cost 3D printing with reinforcement approach as an alternative route for the designing and manufacturing of orthotic devices with complex shapes. It is expected that new applications add-up to increase the body of knowledge about the behaviour of such products which will mix both areas, composite theory and additive manufacturing. This study investigated the fields related to 3D scanning, 3D printing and computer-aided designing for the manufacturing of a customized AFO.

No abstract

Purpose The purpose of this study is improvement of human gait by customized design of ankle foot orthosis (AFO). An has been the most frequently used orthosis in children with cerebral palsy. AFOs are designed to boost existing features or to avoid depression or traumatize muscle contractures. The advantages of AFO’s utilized for advancement in human walk attributes for the improvement in foot deformities patients or youngsters with spastic loss of motion. In this research on the customized design of AFO's to improve gait, there are limitations during walking of foot drop patients. In children with foot drops, specific AFOs were explicitly altered to improve parity and strength which are beneficial to walking positions. Design/methodology/approach This study proposes the customized design of AFOs using computerized and additive manufacturing for producing advances to alter the design and increase comfort for foot drop patients. Structuring the proposed design fabricated by using additive manufacturing and restricted material, the investigation was finalized at the Design Analysis Software (ANSYS). The system that performs best under investigation can additionally be printed using additive manufacturing. Findings The results show that the customized design of AFOs meets the patient’s requirements and could also be an alternative solution to the existing AFO design. The biomechanical consequences and mechanical properties of additive manufactured AFOs have been comparable to historically synthetic AFOs. While developing the novel AFO designs, the use of 3D printing has many benefits, including stiffness and weight optimization, to improve biomechanical function and comfort. To defeat the issues of foot drop patients, a customized AFO is used to improve the human gait cycle with new material and having better mechanical properties. Originality/value This research work focuses on the biomechanical impacts and mechanical properties of customized 3D-printed AFOs and compares them to traditionally made AFOs. Customized AFO design using 3D printing has numerous potential advantages, including new material with lightweight advancement, to improve biomechanical function and comfort. Normally, new applications mean an incremental collection of learning approximately the behavior of such gadgets and blending the new design, composite speculation and delivered substance production. The test results aim to overcome the new AFO structure issues and display the limited components and stress examination. The outcome of the research is the improved gait cycle of foot drop patients.

In the present research, the AZ31 alloy is machined by wire-cut electric discharge machining (WEDM). The experiments were designed according to the Box-Behnken design (BBD) of response surface methodology (RSM). The input process variables, namely servo feed (SF), pulse on-time (Ton), servo voltage (SV), and pulse off-time (Toff), were planned by BBD, and experiments were performed to investigate the cutting rate (CR) and recast layer thickness (RCL). The analysis of variance (ANOVA) was performed to determine the influence of machining variables on response characteristics. The empirical models developed for CR and RCL were solved using Multi-Objective Particle Swarm Optimization (MOPSO). Pareto optimal front is used for the collective optimization of CR and RCL. The optimal solution suggested by the hybrid approach of RSM-MOPSO is further verified using a confirmation test on the random setting indicated by the hybrid algorithm. It is found that the minimum RCL (6.34 µm) is obtained at SF: 1700; SV: 51 V; Toff: 10.5 µs; and Ton: 0.5 µs. However, maximum CR (3.18 m/min) is predicted at SF: 1900; SV: 40 V; Toff: 7 µs; and Ton: 0.9 µs. The error percentage of ±5.3% between the experimental results and predicted solutions confirms the suitability of the proposed hybrid approach for WEDM of AZ31.

Small and medium enterprises (SMEs) are vital contributors and significant drivers of any manufacturing sector. The Industry 4.0 (I 4.0) revolution has made the global economy highly competitive and automated, requiring Indian SMEs to adapt more quickly. Therefore, this study aimed to identify the barriers to implementing I 4.0, simplifying the complex interrelationship among such barriers with the help of a suitable model, categorizing them as independent and dependent ones, and, ultimately, leveling the same drivers, autonomous linkages, and dependent forces. The present investigation thoroughly examined the existing literature and summarized the list of barriers into fifteen significant barriers to the smooth establishment of Industry 4.0 in India. The identified barriers were analyzed with the help of Interpretive Structural Modeling (ISM) Diagraph and Cross-Impact Matrix Multiplication Applied to Classification (MICMAC) analysis. This study was able to explore the interrelationship among these barriers. The study has found found a lack of support from stakeholders, and insufficient managerial support emerged as a major factor neglected by Indian SMEs. However, uncertainty in the predicted demand for products, the lack of an alternate solution to the technological breakdown, and doubt about the sustainability of Industry 4.0 (relating to its potential to lead to unemployment in society, etc.) are significant contingent barriers. These barriers can impact the other strategic choices related to the successful implementation of Industry 4.0. This study’s observations can help decision-makers make strategic decisions to manage the barriers affecting Industry 4.0 in Indian SMEs. This research revealed a scope that can be extended to other South Asian and developing nations. The results of the present work can be further studied with structural equation modeling (SEM) and multiple regression analysis (MRA).