No abstract

A compilation of reports of biological effects and related ultrasound exposure levels can be useful in the identification of trends in effects data that may be developing in the literature. The exposures in the experiments reviewed were at frequencies used in medicine. For short (10 minutes or less) continuous wave exposure, with the exception of behavioral effects where variable results have been observed, this tabulation did not identify any in vivo or in vitro effects at spatial peak, temporal average (SPTA) intensities less than 100 mW/cm2. However, a number of effects using pulsed sources with SPTA intensities under this level have been reported. There are several frequently recurring topics in recent reports which include developmental effects and microstructure changes at the cellular level. In addition to animal investigations, there are some limited human epidemiological studies reporting an association between medical ultrasound exposure in utero and developmental effects. Although sufficient research has not been completed to draw conclusions, the findings deserve further investigation. A systematic pattern of directed research on a large scale is not apparent. The available data consist of many scattered studies conducted by individual investigators and groups throughout the world.

During the interim period while nationally acceptable methods of measurement of referential standards for ultrasonic power are being developed, comparisons are needed among measurment techniques currently used. This is particularly necessary for determining the acoustic power from ultrasonic medical devices. Such a comparison was made between an optical and a radiation force technique to measure the ultrasonic power output of a 1-MHz 1-in.-diameter PZT crystal from 70 mW to 2.3 W total acoustic power. The optical technique follows the theory of Raman and Nath, assaying the diffraction of monochromatic light by ultrasound. In addition, a correction factor is introduced into the calculation of the phase retardation parameter and eliminates the need to determine the pathlength of the light through the sound. The radiation force technique relates the change of position of an air-backed, self-centering, reflecting float to the ultrasonic power. A linear regression analysis between the square of the voltage applied to the crystal and the measured power of each method was used. For a 99% confidence level, there is no statistical difference between the measurements over the range of power investigated, although the variance of the optical measurements was significantly lower than that of the radiation force. Subject Classification: 35.65, 35.80; 85.24.

No abstract

Ultrasonographic B-mode images were obtained at various exposure levels with three real-time diagnostic scanners. Adult human and tissue-equivalent phantom images were compared in terms of diagnostic content and depth of penetration. For the exposure level settings used, spatial-peak pulse-average intensities ranged from approximately 10 to 500 W/cm2. At the 3.50-3.75-MHz nominal frequencies used in the study, images of the human abdomen showed little discernible change in quality with varying exposure levels. However, phantom tests confirmed that depth of penetration is a function of exposure level. The results suggest that a judicious use of exposure level and receiver gain controls can be a practical means for minimizing patient exposure to ultrasound without sacrifice of diagnostic effectiveness.