This article discusses the problem of minimizing power loss in unbalanced distribution systems through phase-balancing. This problem is represented by a mixed-integer nonlinear-programming mathematical model, which is solved by applying a discretely encoded Vortex Search Algorithm (DVSA). The numerical results of simulations performed in IEEE 8-, 25-, and 37-node test systems demonstrate the applicability of the proposed methodology when compared with the classical Cuh & Beasley genetic algorithm. In addition, the computation times required by the algorithm to find the optimal solution are in the order of seconds, which makes the proposed DVSA a robust, reliable, and efficient tool. All computational implementations have been developed in the MATLAB® programming environment, and all the results have been evaluated in DigSILENT© software to verify the effectiveness and the proposed three-phase unbalanced power-flow method.

The transformation of the traditional transmission power systems due to the current rise of non-synchronous generation on it presents new engineering challenges. One of the challenges is the degradation of the inertial response due to the large penetration of high power converters used for the interconnection of renewables energy sources. The addition of a supplementary synthetic inertia control loop can contribute to the improvement of the inertial response. This paper proposes the application of a novel Fuzzy Adaptive Differential Evolution (FADE) algorithm for the tuning of a fuzzy controller for the improvement of the synthetic inertia control in power systems. The method is validated with two test power systems: (i) an aggregated power system and its purpose is to understand the controller-system behavior, and (ii) a two-area test power system where one of the synchronous machine has been replaced by a a full aggregated model of a Wind Turbine Generator (WTG), whereby different limits in the tuning process can be analyzed. Results demonstrate the evolution of the membership functions and the inertial response enhancement in the respective test cases. Moreover, the appropriate tuning of the controller shows that it is possible to substantially reduce the instantaneous frequency deviation.

No abstract

The power flow problem in three-phase unbalanced distribution networks is addressed in this research using a derivative-free numerical method based on the upper-triangular matrix. The upper-triangular matrix is obtained from the topological connection among nodes of the network (i.e., through a graph-based method). The main advantage of the proposed three-phase power flow method is the possibility of working with single-, two-, and three-phase loads, including Δ- and Y-connections. The Banach fixed-point theorem for loads with Y-connection helps ensure the convergence of the upper-triangular power flow method based an impedance-like equivalent matrix. Numerical results in three-phase systems with 8, 25, and 37 nodes demonstrate the effectiveness and computational efficiency of the proposed three-phase power flow formulation compared to the classical three-phase backward/forward method and the implementation of the power flow problem in the DigSILENT software. Comparisons with the backward/forward method demonstrate that the proposed approach is 47.01%, 47.98%, and 36.96% faster in terms of processing times by employing the same number of iterations as when evaluated in the 8-, 25-, and 37-bus systems, respectively. An application of the Chu-Beasley genetic algorithm using a leader–follower optimization approach is applied to the phase-balancing problem utilizing the proposed power flow in the follower stage. Numerical results present optimal solutions with processing times lower than 5 s, which confirms its applicability in large-scale optimization problems employing embedding master–slave optimization structures.

This paper deals with the problem of the optimal placement and sizing of distributed generators (DGs) in alternating current (AC) distribution networks by proposing a hybrid master–slave optimization procedure. In the master stage, the discrete version of the sine–cosine algorithm (SCA) determines the optimal location of the DGs, i.e., the nodes where these must be located, by using an integer codification. In the slave stage, the problem of the optimal sizing of the DGs is solved through the implementation of the second-order cone programming (SOCP) equivalent model to obtain solutions for the resulting optimal power flow problem. As the main advantage, the proposed approach allows converting the original mixed-integer nonlinear programming formulation into a mixed-integer SOCP equivalent. That is, each combination of nodes provided by the master level SCA algorithm to locate distributed generators brings an optimal solution in terms of its sizing; since SOCP is a convex optimization model that ensures the global optimum finding. Numerical validations of the proposed hybrid SCA-SOCP to optimal placement and sizing of DGs in AC distribution networks show its capacity to find global optimal solutions. Some classical distribution networks (33 and 69 nodes) were tested, and some comparisons were made using reported results from literature. In addition, simulation cases with unity and variable power factor are made, including the possibility of locating photovoltaic sources considering daily load and generation curves. All the simulations were carried out in the MATLAB software using the CVX optimization tool.