The use of lighting installations installed in the RW VIII Kelurahan Kesatrian has various aspects interms of installation and use. To prevent losses due to the installation, the solution is to conduct electrical installationtraining. As a result of this training, it is hoped that the community can make efforts to install lighting or independentlyin their respective homes safely and correctly. The purpose of this Community Service is to provide knowledge andskills in installing electrical installations correctly and safely, given the use of household electrical appliances withvarious brands, each brand of household electrical equipment has different reliability, and utilization and operationthat require safety for users.

This study aims to design a PWMtype charger controller, to discover the performance of the PWM type controller, todetermine the compatibility of the PWM type charger controller and MPPT, and to analyze the performance of the PWM type chargercontroller in the PLTPH in JLC. The method of analysis of this study uses field data and is tested on the PWM type charger controller andthe MPPT type charger controller. From the data, the two charger controllers are compared. The results showed that the PWM and MPPTcharger controller performed well to cut off the load current when the battery was full, the PWM and MPPT charger controller performedwell to disconnect the load when the battery began to run out. The PWM and MPPT charger controllers have the same charging speed,and the MPPT charger controller has good efficiency in the PLTPH system.