No abstract

No abstract

Tight gas reservoirs normally have production problems due to very low matrix permeability and significant damage during well drilling, completion, stimulation and production. Therefore, they might not flow gas at optimum rates without advanced production improvement techniques. The main damage mechanisms and the factors that have significant influence on total skin factor in tight gas reservoirs include mechanical damage to formation rock, water blocking, relative permeability reduction around wellbore as a result of filtrate invasion and liquid leak-off into the formation during fracturing operations. Drilling and fracturing fluids invasion mostly occurs through permeable zones or natural fractures and might also lead to serious permeability reduction in the rock matrix that surrounds the wellbore, natural fractures, or hydraulic fracture wings. This study represents evaluation of water blocking damage in tight gas formations, and the influence on core flow efficiency and well productivity. Core scale reservoir simulations were carried out based on a typical Western Australia tight gas reservoir in order to numerically model liquid invasion during overbalanced, balanced and underbalanced drilling, and the effect on gas production in clean-up period. The simulation results describe how water blocking reduces near wellbore permeability and affects well productivity and gas recovery from tight gas reservoirs.

No abstract

Tight formations normally have production problems mainly due to very low matrix permeability and various forms of formation damage that occur during drilling completion and production operation. In naturally fractured tight gas reservoirs, gas is mainly stored in the rock matrix with very low permeability, and the natural fractures have the main contribution on total gas production. Therefore, identifying natural fractures characteristics in the tight formations is essential for well productivity evaluations. Well testing and logging are the common tools employed to evaluate well productivity. Use of image log can provide fracture static parameters, and welltest analysis can provide data related to reservoir dynamic parameters. However, due to the low matrix permeability and complexity of the formation in naturally fractured tight gas reservoirs, welltest data are affected by long wellbore storage effect that masks the reservoir response to pressure change, and it may fail to provide dual-porosity dual-permeability models dynamic characteristics such as fracture permeability, fracture storativity ratio and interporosity flow coefficient. Therefore, application of welltest and image log data in naturally fractured tight gas reservoirs for meaningful results may not be well understood and the data may be difficult to interpret. This paper presents the estimation of fracture permeability in naturally fractured tight gas formations, by integration of welltest analysis results and image log data based on Kazemi's simplified model. Reservoir simulation of dual-porosity and dual-permeability systems and sensitivity analysis are performed for different matrix and fracture parameters to understand the relationship between natural fractures parameters with welltest permeability. The simulation results confirmed reliability of the proposed correlation for fracture permeability estimation. A field example is also shown to demonstrate application of welltest analysis and image log data processing results in estimating average permeability of natural fractures for the tight gas reservoir.