An eight-element antenna system operating at sub 6 GHz is presented in this work for a future multiple-input multiple-output (MIMO) system based on a modified E-slot on the ground. The modified E-slot significantly lowers the coupling among the antenna components by suppressing the ground current effect. The design concept is validated by accurately measuring and carefully fabricating an eight-element MIMO antenna. The experimentation yields higher element isolation greater than −21 dB in the 3.5 GHz band and the desired band is achieved at −6 dB impedance bandwidth. The E-shape slot occupies an area of 17.8 mm × 5.6 mm designed on an FR-4 substrate with dimensions of 150 mm × 75 mm × 0.8 mm. We fed the I-antenna element with an L-shape micro-strip feedline, the size of the I-antenna is 20.4 × 5.2 mm2, which operates in the (3.4–3.65 GHz) band. Moreover, our method obtained an envelope correlation coefficient (ECC) of <0.01 and an ergodic channel capacity of 43.50 bps/Hz. The ECC and ergodic channel capacity are important metrics for evaluating MIMO system performance. Results indicate that the proposed antenna system is a good option to be used in 5G mobile phone applications.

No abstract

No abstract

Designing an ultra-wideband array antenna for fifth generation (5G) is challenging for the antenna designing community because of the highly fragmented electromagnetic spectrum. To overcome bandwidth limitations, several millimeter-wave bands for 5G and beyond applications are considered; as a result, many antenna arrays have been proposed during the past decades. This paper aims to explore recent developments and techniques regarding a specific type of phased array antenna used in 5G applications, called current sheet array (CSA). CSA consists of capacitively coupled elements placed over a ground plane, with mutual coupling intentionally introduced in a controlled manner between the elements. CSA concept evolved and led to the realization of new array antennas with multiple octaves of bandwidth. In this review article, we provide a comprehensive overview of the existing works in this line of research. We analyze and discuss various aspects of the proposed array antennas with the wideband and wide-scan operation. Additionally, we discuss the significance of the phased array antenna in 5G communication. Moreover, we describe the current research challenges and future directions for CSA-based phased array antennas.

This article presents an eight-element tri-band Multiple Input Multiple Output (MIMO) antenna system for future handheld devices. The suggested antenna system consists of a main and sideboards. The feed lines are connected on the main board while the antennas are placed on sideboards, two on each side separately. The total dimension of the main board is 150 × 75 mm 2 , and the sideboard is 150 × 7 mm 2 . The antenna resonates at three distinct 5G allocated bands of 3.1-3.7 GHz, 4.47-4.91 GHz, and 5.5-6.0 GHz with impedance bandwidths of 600 MHz, 440 MHz, and 450 MHz, respectively. The antenna system provides pattern and spatial diversity characteristics with radiation and total efficiency of 78% and 62% and peak gain of 5.8 dBi. The MIMO system is fabricated, and the measured results are found to be in good agreement with the simulations. The isolation among radiating elements in all resonating bands is found to be >16 dB. The vital MIMO performance parameters such as envelope correlation coefficient (ECC) is less than 0.2 for any two antenna array meeting the required standard of less than 0.5 alongside the mean effective gain or MEG ratio of any two antenna meeting the required standard of less than 3 dB for power balance and optimal diversity. The Channel Capacity (CC) is found to be 41.1 bps/Hz, approximately 3 times that of 2 × 2 MIMO operations.