No abstract

The Fe-FeO-graphene nanocomposite material was produced successfully by pulsed wire discharge in graphene oxide (GO) suspension. Pure iron wires with a diameter of 0.25 mm and a length of 100 mm were used in the experiments. The discharge current and voltage were recorded to analyze the process of the pulsed wire discharge. The as-prepared samples-under different charging voltages-were recovered and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Raman spectroscopy, and transmission electron microscopy (TEM). Curved and loose graphene films that were anchored with spherical Fe and FeO nanoparticles were obtained at the charging voltage of 8-10 kV. The present study discusses the mechanism by which the Fe-FeO-graphene nanocomposite material was formed during the pulsed wire discharge process.

Few-layer graphene nanosheets were produced by pulsed discharge in graphite micro-flake suspension at room temperature. In this study, the discharging current and voltage data were recorded for the analysis of the pulsed discharge processes. The as-prepared samples were recovered and characterized by various techniques, such as TEM, SEM, Raman, XRD, XPS, FT-IR, etc. The presence of few-layer graphene (3–9 L) in micrometer scale was confirmed. In addition, it is investigated that the size of recovered graphene nanosheets are influenced by the initial size of utilized graphite micro-flake powder. Based on the process of pulsed discharge and our experimental results, the formation mechanism of few-layer graphene was discussed. The influence of charging voltage on as-prepared samples is also investigated.

No abstract