Magnetic liquid metal is regarded as a promising material due to its integration of fluidic, metallic, and magnetic properties simultaneously. Previously, few methods of fabricating magnetic liquid metal have been proposed. However, either the alloying reaction inside the matrix or the poor performance in electrical and thermal conduction is troublesome in practical applications. Here, inspired by the mussel in nature, polydopamine is introduced to in situ reduce and immobilize silver shells on the surface of iron particles, and then the modified particles mix with liquid metal to prepare liquid metal-based magnetic suspensions (LMMSs). The silver shells can prevent iron particles from alloying with liquid metal and enhance the electrical and thermal conductivities of the LMMS concurrently. Besides, the LMMS thus obtained can keep its magnetism intact for a long period, at least during the 60 days of the test. Compared to directly mixing bare iron particles with liquid metal, the maximum electrical conductivities increase by at least 13.69% and the thermal conductivities increase by almost 4 times in the LMMS. The LMMS also exhibits potential applications in patterning and magnetic manipulation. This work puts forward a new strategy for preparing a LMMS with appealing properties and its broad applications are expected in the future.

Phase change materials have attracted significant attention due to their promising applications in many fields like solar energy and chip cooling. However, they suffer leakage during the phase transition process and have relatively low thermal conductivity. Here, through introducing hard magnetic particles, we synthesize a kind of magnetically tightened form-stable phase change materials. They achieve multifunctions such as leakage-proof, dynamic assembly, and morphological reconfiguration, presenting superior high thermal (increasing of 1400–1600%) and electrical (>104 S/m) conductivity, and prominent compressive strength, respectively. Furthermore, free-standing temperature control and high-performance thermal and electric conversion systems based on these materials are developed. This work suggests an efficient way toward exploiting a smart phase change material for thermal management of electronics and low-grade waste heat utilization.

Liquid metals (LMs), also known as low-melting-point metals and alloys, are metals that occur in a liquid state at or slightly above room temperature (≈25 °C). Owing to their metallic

Ferromagnetic-structural transformation has been studied widely in MnCoGe-based materials. However, the magnetostructural transition (MST) from antiferromagnetic (AFM) orthorhombic phase to ferromagnetic (FM) hexagonal phase, which may lead to a large inverse magnetocaloric effect (MCE), has rarely been reported. Here, the introduction of Mn vacancy lowers the structural transition temperature while retains the AFM state in the orthorhombic phase, thus successfully realizing the AFM-FM MST in Mn 0.95 Co 0.75 Cu 0.25 Ge. Moreover, successive inverse and normal MCEs are observed around the first-order AFM-FM MST and the second-order FM-paramagnetic (PM) transition, respectively. A thermostat is proposed based on this special feature, which could release heat above the critical temperature while absorb heat below the critical temperature by simply applying the same magnetization/demagnetization cycles. This thermostat can be very useful in many applications where a constant temperature is required, such as cryostats and incubators. magnetocaloric, magnetically ordered materials, phase transitions

No abstract