In the present study, a new copper metal-organic framework (MOF)-cotton material was strategically fabricated to exploit its antibacterial properties for postsynthetic modification (PSM) to introduce a free amine to tune the physicochemical properties of the material. A modified methodology for carboxymethylation of natural cotton was utilized to enhance the number of nucleation sites for the MOF growth. Subsequently, MOF Cu(NHBTC) was synthesized into a homogenous surface-supported film via a layer-by-layer dip-coating process. The resultant materials contained uniformly distributed 1 μm × 1 μm octahedral MOF crystals around each carboxymethylated fiber. Importantly, the accessible free amine of the MOF ligand allowed for the PSM of the MOF-cotton surface with valeric anhydride, yielding 23.5 ± 2.2% modified. The Cu ion-releasing performance of the materials was probed under biological conditions per submersion in complex media at 37 °C. Indeed, PSM induces a change in the copper flux of the material over the first 6 h. The materials continue to slowly release Cu ions beyond 24 h tested at a flux of 0.22 ± 0.003 μmol·cm·h with the unmodified MOF-cotton and at 0.25 ± 0.004 μmol·cm·h with the modified MOF-cotton. The antibacterial activity of the material was explored using Escherichia coli by testing the planktonic and attached bacteria under a variety of conditions. MOF-cotton materials elicit antibacterial effects, yielding a 4-log reduction or greater, after 24 h of exposure. Additionally, the MOF-cotton materials inhibit the attachment of bacteria, under both dry and wet conditions. A material of this type would be ideal for clothing, bandages, and other textile applications. As such, this work serves as a precedence toward developing uniform, tunable MOF-composite textile materials that can kill bacteria and prevent the attachment of bacteria to the surface.

No abstract

Selective separation of enantiomers is a substantial challenge for the pharmaceutical industry. Chromatography on chiral stationary phases is the standard method, but at a very high cost for industrial-scale purification due to the high cost of the chiral stationary phases. Typically, these materials are poorly robust, expensive to manufacture, and often too specific for a single desired substrate, lacking desirable versatility across different chiral analytes. Here, we disclose a porous, robust homochiral metalorganic framework (MOF), TAMOF-1, built from copper(II) and an affordable linker prepared from natural L-histidine. TAMOF-1 has shown to be able to separate a variety of model racemic mixtures, including drugs, in a wide range of solvents of different polarity, outperforming several commercial chiral columns for HPLC separations. Although not exploited in the present article, it is worthy to mention that the preparation of this new material is scalable to the multikilogram scale, opening unprecedented possibilities for low-energy chiral separation at the industrial scale.

The metal−organic framework (MOF) H 3 [(Cu 4 Cl) 3 − (BTTri) 8 , H 3 BTTri = 1,3,5-tris( 1 H-1,2,3-triazol-5-yl)benzene] (CuBT-Tri) is a precatalyst for biomedically relevant nitric oxide (NO) release from S-nitrosoglutathione (GSNO). The questions of the number and nature of the catalytically most active, kinetically dominant sites are addressed. Also addressed is whether or not the well-defined structural geometry of MOFs (as solid-state analogues of molecular compounds) can be used to generate specific, testable hypotheses about, for example, if intrapore vs exterior surface metal sites are more catalytically active. Studies of the initial catalytic rate vs CuBTTri particle external surface area to interior volume ratio show that intrapore copper sites are inactive within the experimental error (≤1.7 × 10 −5% of the observed catalytic activity)restated, the traditional MOF intrapore metal site catalysis hypothesis is disproven for the current system. All observed catalysis occurs at exterior surface Cu sites, within the experimental error. Fourier transform infrared (FT-IR) analysis of CN − -poisoned CuBTTri reveals just two detectable Cu sites at a ca. ≥0.5% detection limit, those that bind three or one CN − ("Cu(CN) 3 " and "CuCN"), corresponding to the CN − binding expected for exterior surface, 3-coordinate (Cu surface ) and intrapore, 5-coordinate (Cu pore ) sites predicted by the idealized, metal-terminated crystal structure. Two-coordinate Cu defect sites are ruled out at the ≥0.5% FT-IR detection limit as such defect sites would have been detectable by the FT-IR studies of the CN − -poisoned catalyst. Size-selective poisoning studies of CuBTTri exterior surface sites reveal that 1.3 (±0.4)% of total copper in 0.6 ± 0.4 μm particles is active. That counting of active sites yields a normalized turnover frequency (TOF), TOF norm = (4.9 ± 1.2) × 10 − 2 mol NO (mol Cu surface ) −1 s −1 (in water, at 20 min, 25 °C, 1 mM GSNO, 30% loss of GSNO, and 1.3 ± 0.4 mol % Cu surface ) a value ∼100× higher than the TOF calculated without active site counting. Overall, Ockham's razor interpretation of the data is that exterior surface, Cu surface sites are the catalytically most active sites present at a 1.3 (±0.4)% level of total Cu.

Kinetic resolution of N-acylaziridines by nucleophilic ring opening was achieved with (R)-BINOL as the chiral modifier under boron-catalyzed conditions (see scheme; Ar=3,5-dinitrophenyl). The consumed enantiomer of aziridine can be further converted to an enantioenriched 1,2-chloroamide with recovery of (R)-BINOL.