Fabrication of epitaxial FeSexTe1−x thin films using pulsed laser deposition (PLD) enables improving their superconducting transition temperature (T c) by more than ~40% than their bulk T c. Intriguingly, T c enhancement in FeSexTe1−x thin films has been observed on various substrates and with different Se content, x. To date, various mechanisms for T c enhancement have been reported, but they remain controversial in universally explaining the T c improvement in the FeSexTe1−x films. In this report, we demonstrate that the controversies over the mechanism of T c enhancement are due to the abnormal changes in the chalcogen ratio (Se:Te) during the film growth and that the previously reported T c enhancement in FeSe0.5Te0.5 thin films is caused by a remarkable increase of Se content. Although our FeSexTe1−x thin films were fabricated via PLD using a Fe0.94Se0.45Te0.55 target, the precisely measured composition indicates a Se-rich FeSexTe1−x (0.6 < x < 0.8) as ascertained through accurate compositional analysis by both wavelength dispersive spectroscopy (WDS) and Rutherford backscattering spectrometry (RBS). We suggest that the origin of the abnormal composition change is the difference in the thermodynamic properties of ternary FeSexTe1−x, based on first principle calculations.

Although nanoscale deformation, such as nanostrain in iron chalcogenide FST) thin films, has attracted attention owing to the enhancement of general superconducting properties, including critical current density (Jc) and critical transition temperature, its formation has proven to be an extremely challenging and complex process thus far. Herein, we successfully fabricated an epitaxial FST thin film with uniformly distributed nanostrain by injection of a trace amount of CeO2 inside FST matrix using sequential pulsed laser deposition.Using transmission electron microscopy and geometrical phase analysis, we verified that a trace amount of CeO2 injection forms nanoscale fine defects with a nanostrained region, which has a tensile strain (ε ≅0.02) along the c-axis of the FST matrix. The nanostrained FST thin film achieves a remarkable Jc of 3.5 MA/cm 2 for a self-field at 6 K and a highly enhanced Jc under the entire magnetic field with respect to a pristine FST thin film.Technology,

No abstract