SUMMARYA series of tests including seven different materials and products have been conducted using a controlled equivalence ratio tube furnace test method. The main objective of the tests was to determine yields of fire-generated products at defined combustion conditions.The tube furnace test method was set up and run in close agreement with that described in BS 7990:2003. At the time of experimental work the new tube furnace method was in the process of becoming an international standard. It was thus of interest to make an assessment of the capability of the method for determining production yields of important toxic fire products from different types of materials and products.The test series included solid wood, flexible polyurethane (PUR), fire-retarded rigid PUR, a polyvinyl chloride (PVC) carpet, a high-performance data cable with fluorine-containing polymer matrix, a PVCbased cable sheathing material and fire-retarded polyethylene cable insulation material. Duplicate tests were generally conducted at both well-ventilated and vitiated combustion conditions with these materials.The smoke gases produced from the combustion were quantified for inorganic gases by FTIR technique in all tests. A more detailed analysis of the smoke gases was conducted for some of the materials. This extended analysis contained a detailed assessment of organic compounds including, e.g. volatile organic compounds, isocyanates, aldehydes and polycyclic aromatic hydrocarbons. The analysis further included measurement of the size distribution of fire-generated particles for some of the materials.The quantification of toxic inorganic gases produced by combustion at both well-ventilated and vitiated conditions was successful regarding repeatability and stability. Typical yields for the two fire stages investigated were determined for a wide range of materials and products. The detailed analysis of organic * Correspondence to: Per Blomqvist,

No abstract

No abstract

SUMMARYAn arson fire in a Swedish psychiatric detention clinic led to the death of two patients and injuries to many more. Rescue personnel were quick to go into the building on fire but had difficulties finding their way due to a very heavy smoke. The reconstruction made, indicates that a too easily ignitable mattress provided heat and radiation enough to ignite a PVC flooring material that then became the main source for fire and smoke. Analysis of soot from the fire site and measurements during the reconstruction show that the fire smoke contained large amounts of irritants that might have had an impact on the tragic outcome. In fact, comparing the toxicity of smoke gases produced during the reconstruction, based on different 'toxicity indicators', suggests that irritants in the fire smoke were as dangerous as or even more dangerous than the common asphyxiate type of gases present, CO and HCN.Another suggestion from the reported work is that the importance of flooring material for enclosure fire development might be overlooked. The reconstruction clearly demonstrates that the tragic fire would not have happened if the requirements for the flooring material had been the same as for the walls and ceiling materials.

No abstract