No abstract

a b s t r a c tMonitoring of the marine environment for indications of a leak, or precursors of a leak, will be an intrinsic part of any subsea CO 2 storage projects. A real challenge will be quantification of the probability of a given monitoring program to detect a leak and to design the program accordingly. The task complicates by the number of pathways to the surface, difficulties to estimate probabilities of leaks and fluxes, and predicting the fluctuating footprint of a leak. The objective is to present a procedure for optimizing the layout of a fixed array of chemical sensors on the seafloor, using the probability of detecting a leak as metric. A synthetic map from the North Sea is used as a basis for probable leakage points, while the spatial footprint is based on results from a General Circulation Model. Compared to an equally spaced array the probability of detecting a leak can be nearly doubled by an optimal placement of the available sensors. It is not necessarily best to place the first in the location of the highest probable leakage point, one sensor can monitor several potential leakage points. The need for a thorough baseline in order to reduce the detection threshold is shown.

Risk‐based monitoring requires quantification of the probability of the design to detect the potentially adverse events. A component in designing the monitoring program will be to predict the varying signal caused by an event, here detection of a gas seep through the seafloor from an unknown location. The Bergen Ocean Model (BOM) is used to simulate dispersion of CO2 leaking from different locations in the North Sea, focusing on temporal and spatial variability of the CO2 concentration. It is shown that the statistical footprint depends on seep location and that this will have to be accounted for in designing a network of sensors with highest probability of detecting a seep. As a consequence, heterogeneous probabilistic predictions of CO2 footprints should be available to subsea geological CO2 storage projects in order to meet regulations.

No abstract