Microimplants are being used extensively in clinical practice to achieve absolute anchorage. Success of microimplant mainly depend on its primary stability onto the cortical bone surface and the associated Microdamage of the cortical bone during insertion procedure leads to many a microimplants to fail and dislodge from the cortical bone leading to its failure. Even though, previous studies showed occurrence of microdamage in the cortical bone, they were mainly 2-dimension studies or studies that were invasive to the host. In the present study, we used a non-invasive, non-ionizing imaging technique- Optical Coherence Tomography (OCT), to image and analyze the presence of microdamage along the cortical bone surrounding the microimplant. We inserted 80 microimplants in two different methods (drill and drill free method) and in two different angulations onto the cortical bone surface. Images were obtained in both 2D and 3D imaging modes. In the images, microdamage in form of microcracks on the cortical bone surface around the bone-microimplant interface and micro-elevations of the cortical bone in angulated microimplant insertions and the presence of bone debris due to screwing motion of the microimplant on insertion can be appreciated visually and quantitatively through the depth intensity profile analysis of the images.

Objectives: The study was done to evaluate the efficacy of optical coherence tomography (OCT), to detect and analyze the microdamage occurring around the microimplant immediately following its placement, and to compare the findings with micro-computed tomography (μCT) images of the samples to validate the result of the present study. Methods: Microimplants were inserted into bovine bone samples. Images of the samples were obtained using OCT and μCT. Visual comparisons of the images were made to evaluate whether anatomical details and microdamage induced by microimplant insertion were accurately revealed by OCT. Results: The surface of the cortical bone with its anatomical variations is visualized on the OCT images. Microdamage occurring on the surface of the cortical bone around the microimplant can be appreciated in OCT images. The resulting OCT images were compared with the μCT images. A high correlation regarding the visualization of individual microcracks was observed. The depth penetration of OCT is limited when compared to μCT. Conclusions: OCT in the present study was able to generate high-resolution images of the microdamage occurring around the microimplant. Image quality at the surface of the cortical bone is above par when compared with μCT imaging, because of the inherent high contrast and high-resolution quality of OCT systems. Improvements in the imaging depth and development of intraoral sensors are vital for developing a real-time imaging system and integrating the system into orthodontic practice.

Bonding of braces is an essential part in contemporary orthodontic treatment. For the proper strength of bracket bonding, enamel conditioning or surface treatment on tooth surface is required. Treatment on the tooth surface such as prophylaxis smoothing with pumice and enamel etching results in considerable damages to the enamel surface of the tooth. In this study, we have proposed optical coherence tomography as a noninvasive imaging technique for the evaluation of damage induced during such treatment procedures. Using depth intensity analysis of the obtained cross-sectional images, the damage resulting to the enamel surface was studied after prophylaxis smoothening and etching steps.

In clinical orthodontic practice, fixed brackets are widely used for tooth movement and adjustments. Although years of research and development have improved the workability of fixed orthodontic brackets, there are still controversies regarding its plausible destructive influence on the enamel surface of tooth. This, in turn, makes the quantitative assessment of the enamel surface after specific orthodontic treatment procedures important in order to opt for the most effective treatment procedure. Through this study, we show the practical applicability of optical coherence tomography (OCT) as a non-ionizing and nondestructive assessment tool for measuring enamel loss after each step of orthodontic bracket bonding. Two-dimensional and volumetric OCT images are used for the evaluation of the tooth enamel. From the depth intensity profile analysis of cross-sectional OCT images, the changes in the individual internal layer thickness are calculated. A software algorithm was developed to evaluate the structural connectivity in the enamel for analyzing enamel loss on the tooth surface and for detecting enamel abrasion. An intensity-based layer segmentation algorithm is also developed to analyze and evaluate enamel wear in the tooth after each step. Using the proposed algorithms, the total enamel present after each treatment procedure was measured and tabulated for analysis.

This paper presents an overview of the current knowledge about non-invasive investigations using optical coherence tomography (OCT) -structural imaging of oral tissues and biomaterials applied in vivo and in vitro -employed in the field of orthodontics. Optical coherence tomography is an emerging technology for producing high-resolution cross-sectional imagery. OCT provides cross-sections of tissues in a non-contact and non-invasive manner. The device measures the time delay and the intensity of light scattered or reflected off of biological tissues, which results in tomographic imaging of their internal structure. This is achieved by scanning tissues at a low resolution. This paper aims to describe the application of OCT in the field of orthodontics, through previous studies investigating the development and disorders of natural tooth hard tissues; the paper also describes OCT studies on dental demineralisation and dental biomaterial characterisation. We explain the working principles of OCT and mention different types of OCT systems in use. Comparisons between OCT and other commonly used orthodontic diagnostic aids are also made and the possible future implications of OCT in orthodontics is discussed.