This paper proposes a novel polygonal layout based on rectangular plane stereo space. The illumination and signal-to-noise ratio of polygonal layout and circular layout is simulated in a 5 m × 4 m × 3 m room; The simulation results show that: compared with the illuminance uniformity of the circular layout of 0.67, the illuminance uniformity of the polygonal layout reaches 0.81, which is improved by 20.90%. The position and power of the polygonal layout are further optimized respectively by particle swarm optimization (PSO), and the illuminance uniformity and signal-to-noise ratio quality factors (Q) of the polygonal layout can be increased from 0.81 and 19.31 to 0.88 and 37.38 after optimization, respectively. The illuminance uniformity increased by 8.64%, and the Q increased by 93.58%. The experimental system of polygonal layout optimized by PSO is built, by comparing the simulation and experimental results, the average illuminance error of the simulation and experiment is 10.58%, the illuminance uniformity error is 5.68%, and the illuminance distribution trend is consistent.

With the improvement of the market's requirements on the color rendering of high-voltage LED light sources, accurately predicting the junction temperature of high-voltage LED, preventing led aging and extending the service life have become a topic worth studying.In this paper, the relationship between the junction temperature and the chromaticity parameters, and the relationship between the chromaticity parameters and the driving current are respectively studied for the blue excited yellow phosphor type highvoltage white LED. Finally, the functional relationship among the junction temperature, the chromaticity parameters and the driving current is established.To further accurately predict the junction temperature of the high-voltage LED.Subtracting the color fidelity R f and color gamut R g of the initial state from the color fidelity and color gamut at the measurement temperature to obtain the relative chromaticity parameters∆R f , ∆R g can eliminate the self heating effect of the current; Subtracting the initial temperature T j from the measured temperature to obtain the relative junction temperature ∆T j can eliminate the temperature deviations introduced by the high temperature chamber.The functional relationship among the relative junction temperature ∆T j and the relative chromaticity parameters ∆R f , ∆R g fitting curve are obtained. For 12V and 6V high-voltage LEDs with the same power, the linearities of the fitting functions of ∆T j -∆R f and ∆T j − ∆R g are close to 1. Compared with the results measured by T3ster, the maximum errors of junction temperature prediction based on color fidelity and color gamut are 3.33% and 4.24% respectively, which are within the acceptable range. It shows that these methods are entirely feasible and has particular practical value.

No abstract