The wide variety of arc faults induced by different load types renders residential series arc fault detection complicated and challenging. Series dc arc faults could cause fire accidents and adversely affect power systems if not promptly detected. However, in practical power systems, they are difficult to detect because of a low arc current, absence of a zero-crossing period, and various abnormal behavior based on different types of power loads and controllers. In particular, conventional protection fuses may not be activated when they occur. Undetected arc faults could cause false operation of power systems and potentially lead to damage to property and human casualties. Therefore, it is imperative to develop a detection system for series arc faults in DC systems for the reliable and efficient operation of such systems. In this study, several typical loads, especially nonlinear and complex loads such as power electronic loads, were chosen and analyzed, and five time-domain parameters of the current-average value, median value, variance value, RMS value, and distance of the maximum and minimum values-were chosen for arc fault detection. Various machine learning algorithms were used for arc fault detection and their detection accuracies were compared.

Series arc faults are becoming more dangerous in DC systems. Without detecting in time and separation correctly, these fault events can cause electrical fires or explosions, creating a massive threat to people's safety and properties. This paper presents an analysis and comparison of DC series arc fault detection using various artificial intelligence (AI) algorithms in DC systems. The combinations of six feature parameters in both time and frequency domains with various AI techniques are recommended to detect DC series arc fault effectively. The performance and effectiveness of different combinations between feature parameters and learning techniques are summarized and discussed. Finally, practical challenges are identified, and suitable combinations of feature parameters and learning techniques are recommended for different operation conditions.

Publication date **** ᴑ ᴑ , ᴑ ᴑ ᴑ ᴑ, current version **** ᴑ ᴑ , ᴑ ᴑ ᴑ ᴑ.

Capacitors are critical components of power converter systems as they influence the cost, size, performance, and scale of such systems. However, capacitors exhibit the highest degeneration and breakdown rates among all power converter components due to their wear-out failures and short lifespans. Therefore, condition monitoring is a vital process to estimate the health status of capacitors and to provide predictive maintenance for ensuring stability in the operation of power converter systems. The equivalent series resistance (ESR) and the capacitance of the capacitor are two widely used parameters for evaluating the health status of capacitors. Unlike the ESR, the capacitance of a capacitor is suitable for the health monitoring of various types of capacitors; therefore, it is more preferable for large-scale systems. This paper presents an overview of previous research addressing this aspect of capacitors and provides a better understanding of the capacitance monitoring of capacitors utilized in power converter systems.

Arc phenomena are usually related to the undesired disengagement of two electrical connections. The emission power discharge from the failure arc may damage wiring and can present a fire hazard. Numerous studies have been proposed to detect arc events and quickly isolate them from an electrical system. DC arc faults are often sorted into two types: series and parallel arcs. A series arc may be the outcome of discharging links in electrical wiring. By contrast, the parallel arc occurs between two electric wires, or between a link and a ground, owing to contamination or poor isolation. The currents in a system with an arc fault are considerably greater when the arc parallel in nature than when the arc is series in nature. In this paper, the electric activities of a network are investigated for the duration of series and parallel arc failures in both the time and frequency domains. The arcing behavior investigated is selected to allow for the identification of series and parallel arcs. The sorting of electrical arcs in an accurate and reliable manner is useful for electrical protection schemes. The identification process used here is based on data related to different domains, such as load current and voltage. In this study, eight learning techniques are investigated with the aim of detecting series and parallel arc faults. The arc behaviors were studied in the various domains. We used the load current and voltage characteristics as an statistic for categorizing a given arc failure. This study could be beneficial to enhance the stability and reliability of arc-fault detectors.