Four-rotor micro aerial robots, so called quadrotor UAVs, are one of the most preferred type of unmanned aerial vehicles for near-area surveillance and exploration both in military and commercial in-and outdoor applications. The reason is the very easy construction and steering principle using four rotors in a cross configuration. However, stabilizing control and guidance of these vehicles is a difficult task because of the nonlinear dynamic behavior. In addition, the small payload and the reduced processing power of the onboard electronics are further limitations for any control system implementation. This paper describes the development of a nonlinear vehicle control system based on a decomposition into a nested structure and feedback linearization which can be implemented on an embedded microcontroller. Some first simulation results underline the performance of this new control approach for the current realization.

Poaching is an illegal activity that remains out of control in many countries. Based on the 2014 report of the United Nations and Interpol, the illegal trade of global wildlife and natural resources amounts to nearly $213 billion every year, which is even helping to fund armed conflicts. Poaching activities around the world are further pushing many animal species on the brink of extinction. Unfortunately, the traditional methods to fight against poachers are not enough, hence the new demands for more efficient approaches. In this context, the use of new technologies on sensors and algorithms, as well as aerial platforms is crucial to face the high increase of poaching activities in the last few years. Our work is focused on the use of vision sensors on UAVs for the detection and tracking of animals and poachers, as well as the use of such sensors to control quadrotors during autonomous vehicle following and autonomous landing.

Abstract-Battery Electric Vehicles are becoming a promising technology for road transportation. However, the main disadvantage is the limited cruising range they can travel on a single battery charge. This paper presents a novel extended ecological cruise control system to increase the autonomy of an electric vehicle by using energy-efficient driving techniques. Driven velocity, acceleration profile, geometric and traffic characteristics of roads largely affect the energy consumption. An energy-efficient velocity profile should be derived based on anticipated optimal actions for future events by considering the electric vehicle dynamics, its energy consumption relations, traffic and road geometric information. A nonlinear model predictive control method with a fast numerical algorithm is adapted to determine proper velocity profile. In addition, a novel model to describe the energy consumption of a seriesproduction electric vehicle is introduced. The hyperfunctions concept is used to model traffic and road geometry data in a new way. The proposed system is simulated on a test track scenario and obtained results reveal that the extended ecological cruise control can significantly reduce the energy consumption of an electric vehicle.

Abstract-Small quadrotor UAVs represent a very interesting class of small flying robots because of their ability to fly in-and outdoor. Therefore, these vehicles have an enormous potential for near-area surveillance and exploration. However, especially indoor flight is a difficult task for vehicle control which has to stabilize the desired velocity vector and the required attitude of the quadrotor. This paper mainly describes the development of such a nonlinear vehicle control system based on state-dependent Riccati equations (SDRE). The controller is integrated in an overall mission system concept for UAVs.

Abstract-Unmanned aerial vehicles (UAVs) are the future technology for autonomous fast transportation of individual goods. They have the advantage of being small, fast and not to be limited to the local infrastructure. This is not only interesting for delivery of private consumption goods up to the doorstep, but also particularly for smart factories. One drawback of autonomous drone technology is the high development costs, that limit research and development to a small audience. This work is introducing a position control with collision avoidance as a first step to make low-cost drones more accessible to the execution of autonomous tasks. The paper introduces a semilinear state-space model for a commercial quadrotor and its adaptation to the commercially available AR.Drone 2 system. The position control introduced in this paper is a model predictive control (MPC) based on a condensed multipleshooting continuation generalized minimal residual method (CMSCGMRES). The collision avoidance is implemented in the MPC based on a sigmoid function. The real-time applicability of the proposed methods is demonstrated in two experiments with a real AR.Drone quadrotor, adressing position tracking and collision avoidance. The experiments show the computational efficiency of the proposed control design with a measured maximum computation time of less than 2ms.