The present work reports the As, Cr, Cu, Pb, Zn, and Fe concentrations of drinking water samples in Neyshabur Plain, Iran. This study aimed also to ascertain the potential consumers' health risk of heavy metal intake. Heavy metal concentrations were analyzed by inductively coupled plasma optical emission spectrometry. The highest and lowest average values in the analyzed water samples were observed for Fe (9.78 ± 5.61 μg/L) and As (1.30 ± 2.99 μg/L), respectively. These values were well below the limits recommended by the World Health Organization and the Iranian national standard. Heavy metal pollution index and heavy metal evaluation index were used to evaluate drinking water quality. The risk index was calculated by chronic daily intake and hazard quotient according to the United States Environmental Protection Agency approach. Heavy metal pollution index in all the samples was less than 100, indicating that it is a low-level heavy metal. The total risk of all heavy metals in the urban environment varied from 40.164 × 10 to 174.8 × 10. In this research, the maximum average of risk belonged to lead and copper with the respective values of 60.10 × 10and 33.99 × 10 from the selected wells. However, considering the toxic effect of some elements, including Pb and As, in the chronic exposure of consumers, we suggest a continuous evaluation and monitoring of drinking water resources.

The vermicompost using earthworms (Eisenia Fetida) was produced from food waste and chemical parameters (EC, pH, carbon to nitrogen contents (C/N)) and germination bioassay was examined in order to assess the stability and maturity indicators during the vermicomposting process. The seed used in the germination bioassay was cress. The ranges of EC, pH, C/N and germination index were 7.5-4.9 mS/cm, 5.6-7.53, 30.13-14.32% and 12.8-58.4%, respectively. The germination index (GI) value revealed that vermicompost rendered as moderate phytotoxic to cress seed. Pearson correlation coefficient was used to evaluate the relationship between the parameters. High statistically significant correlation coefficient was calculated between the GI value and EC in the vermicompost at the 99% confidence level. The C/N value showed that the vermicompost was stable. As a result of these observations, stability test alone, was not able to ensure high vermicompost quality. Therefore, it appears that determining vermicompost quality requires a simultaneous use of maturity and stability tests.

Public health is at risk from physical and chemical contaminants in the drinking water which may have immediate health consequences. The data from the current study was evaluated for groundwater quality in the rural villages of Neyshabur County in Iran. For determination of the essential physicochemical parameters, water samples were collected from 30 randomly-selected water wells during 2013 and 2014. The samples were tested in situ to measure physical parameters of pH and electrical conductivity and chemical parameters of total dissolved solids, total hardness and levels of calcium, magnesium, carbonates, bicarbonates, sodium, potassium, chloride and sulfates. The APHA method was applied to determine the physicochemical parameters of the water samples.

This cross-sectional study was conducted on the drinking water resources of the city of Jolfa (East Azerbaijan province, Iran) from samples taken from 30 wells. Calcium hardness, pH, total alkalinity, TDS, temperature and other chemical parameters were measured using standard methods. The Langelier, Rayzner, Puckhorius and aggressive indices were calculated. The results showed that the Langelier, Reynar, Puckorius, Larson-skold and aggressive indices were 1.15 (± 0.43), 6.92 (± 0.54), 6.42 (± 0.9), 0.85 (± 0.72) and 12.79 (± 0.47), respectively. In terms of water classification, 30% of samples fell into the NaCl category and 26.6% in the NaHCO3 category and 43.4% samples in the CaHCO3, MgHCO3 and MgCl category. The sedimentation indices indicated that the water of the wells could be considered as corrosive.

The data presented in this article was related to the research article entitled, “The use of Cerastoderma Lamarcki shell for Acid Black 1 adsorption from aqueous solutions.” The characterization data of Cerastoderma Lamarcki shell was analyzed using various instrumental techniques (X-ray diffraction and SEM). The kinetic and isotherm data of pH, initial AB1 concentration, contact time, and CLS dosage were investigated. The optimum conditions for AB1 adsorption using CLS adsorbent were found to be 2 g of adsorbent, pH 2, and a contact time of 60 min. The adsorption data of CLS fit well with the Langmuir model and pseudo-second order model. Finally, the experimental data showed that CLS is a suitable and low-cost adsorbent for the removal of AB1 from aqueous solutions.