Undertake the study of the topic home monitoring system, the wisdom of building the health care environment monitoring and automation control systems, sensor signal is transmitted through ZigBee wireless technology and NI data acquisition card to do transfer cable transmission technology. In addition, an infrared remote control technology for automation and control for air conditioning. Improvements in the system developed sensors were temperature, humidity, carbon monoxide, illumination, and sensor signal transmission through wireless technology and cable transmission technology, to the terminal for processing, record, query and other features, then the terminal through RS -232 assigned for IR control module control packets, and output through PPM IR code to the IR receiver, and thus control of indoor air conditioning.

In the chemical engineering territory, the important parameters regarding reaction are fundamentally temperature, pressure, and concentration, among which the setting and monitoring of reaction temperature are crucial to complete the reaction efficiently, safely, and quickly. MOF Synthesis, due to the different heating pattern or unstable heating, usually affects the rate of nucleation and crystallization, causing the difference of crystalline. For the temperature sensing module made in this system, to ensure the reliability, this project implements the monitoring with wireless ZigBee chip and wire DAQ data acquisition card. The terminal interface sends the control package to infrared emission module through RS-232, and the signals are sent to infrared receiving module through infrared emission module to implement the automatic control of heating oven. The practical results are: (1) complete the temperature sensing module made by J type thermal couple, (2) ZigBee wireless and DAQ Data Acquisition Card wire transmission technology, (3) completing the development of infrared receiving and emitting control module, (4) the interface designed for this system covers the functions, such as monitoring, controlling, and recording, (5) Remote monitoring and control implemented with internet, (6) MOF synthesis heating experience.

This study production of smart house to show the entire system, the use of self-sensing module and the 8051 monocrystal chip processing sensor signals, the success achieved with the measurement of temperature, humidity, illumination, carbon monoxide sensor module. The way transmits by wireless (ZigBee chips) and wired (DAQ signal acquisition device) sensor value send to the server-side carries on remote monitoring and record etc. In accordance with environmental requirements set in the server-side sensing value, using the infrared ray way automatic control load. When necessity also can use the available hand-hold remote control, dual control functions to enable the environment to be safer and the comfortable home life.