An electrostatically driven silicon micro scanning mirror (MSM) for one-dimensional (1-D) and two-dimensional (2-D) deflection of light is presented. A special configuration of the driving electrodes allows the use of small electrode gaps without restricting the deflection of the plate geometrically. In this paper, the starting of the oscillation and the operation of the scanner is discussed. Experimental results show that scan angles of up to 60 degrees can be achieved at a driving voltage of only 20 V. The 2-D deflection of a laser beam is obtained by a gimbal mounting of the mirror plate. For the fabrication of the devices, SOI-wafers are used as the base material. The mechanical structures are defined by a deep silicon etch. For the electrical isolation of areas on the movable frame, polysilicon-filled trenches are used. The mechanical stability of the scanners is tested. The devices resist shocks of more than 1000 g and show no change of the resonance frequency even after long run tests of 7x10/sup 9/ periods

No abstract

No abstract

No abstract

No abstract