No abstract

No abstract

A novel technique to enhance the phase shifting range of a liquid crystal (LC)-based, substrate-integrated waveguide (SIW) phase shifter by inserting inductive posts (IPs) is presented for the first time. The IPs inserted in the LC-based SIW phase shifter produce a phase advance based on the relative permittivity of the LC, resulting in an additional differential phase shift. At 28 GHz, the proposed structure with IPs achieves a ratio of maximum differential phase shift (Δϕmax) to maximum insertion loss (ILmax) (FoM1) = 52.82 °/dB and ratio of maximum differential phase shift to length (FoM2) = 2.62 °/mm. Compared with conventional LC-based SIW phase shifters that lack an IP and use the same amount of LC, the FoM1 increased by 16% and the FoM2 increased by 55%. In addition, compared to the typical structure that uses additional LCs instead of IPs, the FoM1 decreased by 7%, and FoM2 increased by 21%. Therefore, inserting IPs into the LC-based SIW phase shifter can reduce the dimensions of the phase shifter and the amount of LCs required to achieve the desired differential phase shift. We believe this work can contribute to the design of compact and efficient SIW phase shifters for future telecommunication systems.

We evaluated hexadecyltrimethylammonium bromide (HTAB) for liquid crystals (LCs) in layered ITO cells with various cell gap conditions. HTAB is a surfactant that can self-align vertically on the surface of indium tin oxide (ITO) substrates and induce homeotropic alignment of the LC molecules. For implementing RF devices with HTAB and LCs, we should consider limitations caused by the design conditions which are different from conventional liquid crystal displays such as cell gap. We quantified the concentration of HTAB ([HTAB]) that is necessary to form and maintain a sufficiently dense vertical alignment of 5CB (4-Cyano-4′-pentylbiphenyl). The required [HTAB] for full-homeotropic alignment was increased to the cell gap until it was too large to support the transfer of the surface alignment to the LC molecules, due to the weak anchoring nature of HTAB. We also showed the phase-change characteristic of the LC mixture related to [HTAB] for the design of RF devices driven by light or heat. This study may help to guide the development of new approaches to designing efficient RF devices that use LCs.