The use of composite materials and polynary compounds is a promising strategy to promote conductometric sensor performances. The perovskite oxides provide various compositional combinations between different oxides for tuning gas-sensing reaction and endowing rich oxygen deficiencies for preferable gas adsorption. Herein, a sacrificial colloidal template approach is exploited to fabricate crystalline ternary LaFeO3 perovskite porous thin films, by transferring a La(3+)-Fe(3+) hybrid solution-dipped template onto a substrate and sequent heat treatment. The honeycomb-like LaFeO3 film consisted of monolayer periodic pore (size: ∼ 500 nm) array can be successfully in situ synthesized in a homogeneous layout with a single phase of perovskite. This periodic porous LaFeO3 film with p-type semiconductivity exhibits a high gas response, fast response (∼4 s), trace detection capacity (50 ppb), and favorable ethanol selectivity from similar acetone. It exhibits enhanced sensing performances compared to those of a binary n-type Fe2O3 film and a nontemplated dense LaFeO3 film. In addition, a five-axe spiderweb diagram is introduced to make a feasible evaluation of the optimal practical work condition, comprehensively regarding the response/recovery rate, gas response, selectivity and operating temperature. The enhanced ethanol sensing mechanism of honeycomb-like LaFeO3 periodic porous film is also addressed. This novel and facile route to fabricate well-ordered porous LaFeO3 thin film can also be applied to many fields to obtain special performances, such as solar cells, ion conductors, gas separation, piezoelectricity, and self-powered sensing device system.

In this work, we report a dramatic enhancement in ethanol sensing characteristics of NiO hollow nanostructures via decoration with In2O3 nanoclusters. The pure NiO and 1.64-4.41 atom % In-doped NiO and In2O3-decorated NiO hollow spheres were prepared by ultrasonic spray pyrolysis, and their gas sensing characteristics were investigated. The response (the ratio between the resistance in gas and air) of the In2O3-decorated NiO hollow spheres to 5 ppm ethanol (C2H5OH) was 9.76 at 350 °C, which represents a significant improvement over the In-doped NiO and pure NiO hollow spheres (3.37 and 2.18, respectively). Furthermore, the 90% recovery time was drastically reduced from 1880 to 23 s, and a selective detection of ethanol with negligible cross-response to other gases was achieved. The enhanced gas response and fast recovery kinetics were explained in relation to the thinning of the near-surface hole accumulation layer of p-type NiO underneath n-type In2O3, the change of charge carrier concentration, and the variation of oxygen adsorption.

Ultra-selective and sensitive detection of benzene was achieved using Pd-loaded SnO2 yolk–shell micro-reactor sensing films coated with a catalytic Co3O4 overlayer.

Au@NiO yolk-shell nanoparticles (NPs) were synthesized by simple solution route and applied for efficient gas sensor towards H₂S gas. Carbon encapsulated Au (Au@C core-shell) NPs were synthesized by glucose-assisted hydrothermal method, whereas Au@NiO yolk-shell NPs were synthesized by precipitation method using Au@C core-shell NPs as a template. Sub-micrometer Au@NiO yolk-shell NPs were formed having 50-70 nm Au NPs at the periphery of NiO shell (10-20 nm), which was composed of 6-12 nm primary NiO particles. Au@NiO yolk-shell NPs showed higher response for H2S compared to other interfering gases (ethanol, p-xylene, NH₃, CO and H₂). The maximum response was 108.92 for 5 ppm of H₂S gas at 300 °C, which was approximately 19 times higher than that for the interfering gases. The response of Au@NiO yolk-shell NPs to H₂S was approximately 4 times higher than that of bare NiO hollow nanospheres. Improved performance of Au@NiO yolk-shell NPs was attributed to hollow spaces that allowed the accessibility of Au NPs to gas molecules. It was suggested that adsorption of H₂S on Au NPs resulted in the formation of sulfide layer, which possibly lowered its work function, and therefore tuned the electron transfer from Au to NiO rather NiO to Au, which leaded to increase in resistance and therefore response.