This article draws attention to the difficulties in developing an integrated approach, especially the evaluation and evaluation of the main helicopter technology. Fiber optic technology is a technology that allows you to create a unified system. This allows the measurement of various physical parameters such as vibration, distortion, temperature, volume and other parameters, given the magnitude of optical fiber science. RMB can be integrated into production, which is an important factor in the amount of RMB related to the design and manufacture of helicopters. The test results, the test bench, and the rotor of the helicopter and light using optical fiber transmission in the Prague fiber optic filter emphasize the importance of developing technology to track the helicopter's use of optical fiber. Other embodiments of the use of optical transmission systems that use fiber-optic technology, such as cable warning of explosives and helicopter damage as well as system weight and transitions. The conduction system monitors air technology.

Incremental forming is a rapid prototyping process that allows sheets to be formed without using forming tools, using a numerically controlled machine tool. A wide variety of shapes can be generated with this process. The objective of this work is to study through experimental tests and numerical simulations the behavior of ASTM grade 2 titanium during incremental point forming (SPIF). A Spinner MFG850 machining center from ISET in JENDOUBA coupled to a multi-component force sensor FN7325 was used for the forming of thin sheets by this process. As the diameter of the punch and its incremental movement are parameters having a direct effect on the forming force, tests with diameters of the punches dp varying between 10 and 15 mm and various paths made up of circular movements in the horizontal plane have been carried out experimentally. Numerical simulation is carried out in large elastoplastic deformations with ABAQUS/explicit. Comparisons of the evolution of the forming force for different values of the diameter of the punch dp and of the displacement step ∆zare carried out.