In the construction industry, the large number of residues presents a challenge for recycling and the possibility of producing new materials. This study reported the effects of the addition of polyvinyl chloride (PVC) residues and cement/alumina trihydrate on the production of a fire-resistant thermalacoustic insulation material. The composites were verified by scanning electron microscopy, the polyurethane (PU) cells were maintained with the addition of PVC, cement, and trihydrate alumina. The reduction in compressive strength for boards with 50% PVC waste as a replacement for the PU raw material. The boards showed the composites' conductivity coefficient was lower than that of the perforated brick and combustion deceleration up to flame extinction in the flammability test (UL94) because of the PVC/cement/ alumina trihydrate. They also presented cost savings (~57%) and carbon dioxide emissions (~49%) from the raw material, contributing to developing a less predatory and socio-environmentally responsible industry.

Biopacking material was obtained by incorporating tangerine peel extract (Citrus reticulata) in cellulose acetate (CA) film. The acetate film with tangerine extract was shown to have a homogeneous material characteristic by FTIR and DSC analysis, being reinforced in MEV and MFA, and showed absence of pores in the film with extract. These characteristics justify the reduced water absorption and release of the CA membrane extract. Low water absorption is important for the film to act as a barrier with external environment and the release of the extract was sufficient to prevent the growth of the strains investigated on the sample surface. The introduction of the extract also reduced the tensile strength and deformation of the film. This study showed the good potential of biomass for active bio packing that can gradually replace non-renewable packaging and take advantage of agricultural waste.

No abstract