No abstract

No abstract

Losses due to eddy currents in an open-type transformer core are significantly reduced by the lamination of the transformer core. In order to further reduce the eddy current losses, the open-type core often has a multi-part structure, i.e., it is composed of several more slender cores. The complete homogenization of such a core is not possible when an A→,V−A→ formulation is used, where A and V represent the magnetic vector potential and electric scalar potential, respectively. On the other hand, an A→,T→−A→ formulation, where T represents the electric vector potential, enables the complete homogenization of the general open-type core, but the simulation converges poorly due to the large number of degrees of freedom. By eliminating the redundant degrees of freedom, the convergence rate is significantly improved, and is at least twice as good as the convergence rate of the simulation based on the A→,V−A→ formulation. In this paper, a method for the calculation of the eddy current losses in an open-type core based on the A→,T→−A→ formulation with the elimination of redundant degrees of freedom is presented. The method is validated by comparison with a brute force simulation based on the A→,V−A→ formulation, and the efficiency of the method is determined by comparison with the standard homogenization method based on the A→,V−A→ formulation.

The Power Voltage Transformer, which is a singlephase unit used for direct conversion of power from high to low voltage, is becoming more and more relevant for substation application. This is why this paper aims to present the properties and advantages of the open-core design concept, which has been functioning very well for a number of years in inductive voltage and combined instrument transformers, enhancing the transformer reliability and operational safety. Furthermore, the intention is to list the known possible application options of these transformers and finally to succinctly point out the guidelines for future development, which would benefit both the manufacturer and the user.

No abstract