The fabrication of nanostructured bimetallic materials through electrochemical routes offers the ability to control the composition and shape of the final material that can then be effectively applied as (electro)-catalysts. In this work a clean and transitory hydrogen bubble templating method is employed to generate porous Cu-Au materials with a highly anisotropic nanostructured interior. Significantly, the co-electrodeposition of copper and gold promotes the formation of a mixed bimetallic oxide surface which does not occur at the individually electrodeposited materials. Interestingly, the surface is dominated by Au(I) oxide species incorporated within a Cu(2)O matrix which is extremely effective for the industrially important (electro)-catalytic reduction of 4-nitrophenol. It is proposed that an aurophilic type of interaction takes place between both oxidized gold and copper species which stabilizes the surface against further oxidation and facilitates the binding of 4-nitrophenol to the surface and increases the rate of reaction. An added benefit is that very low gold loadings are required typically less than 2 wt% for a significant enhancement in performance to be observed. Therefore the ability to create a partially oxidized Cu-Au surface through a facile electrochemical route that uses a clean template consisting of only hydrogen bubbles should be of benefit for many more important reactions.

No abstract

A rapid electrochemical method based on using a clean hydrogen‐bubble template to form a bimetallic porous honeycomb Cu/Pd structure has been investigated. The addition of palladium salt to a copper‐plating bath under conditions of vigorous hydrogen evolution was found to influence the pore size and bulk concentration of copper and palladium in the honeycomb bimetallic structure. The surface was characterised by X‐ray photoelectron spectroscopy, which revealed that the surface of honeycomb Cu/Pd was found to be rich with a Cu/Pd alloy. The inclusion of palladium in the bimetallic structure not only influenced the pore size, but also modified the dendritic nature of the internal wall structure of the parent copper material into small nanometre‐sized crystallites. The chemical composition of the bimetallic structure and substantial morphology changes were found to significantly influence the surface‐enhanced Raman spectroscopic response for immobilised rhodamine B and the hydrogen‐evolution reaction. The ability to create free‐standing films of this honeycomb material may also have many advantages in the areas of gas‐ and liquid‐phase heterogeneous catalysis.

No abstract

The electrochemical formation of nanostructured materials is generally achieved by reduction of a metal salt onto a substrate that does not influence the composition of the deposit. In this work, we report that Ag, Au and Pd electrodeposited onto Cu under conditions where galvanic replacement is not viable and hydrogen gas is evolved results in the formation of nanostructured surfaces that unexpectedly incorporate a high concentration of Cu in the final material. Under cathodic polarisation conditions, the electrodissolution/corrosion of Cu occurs, which provides a source of ionic copper that is reduced at the surface–electrolyte interface. The nanostructured Cu/M (M=Ag, Au and Pd) surfaces are investigated for their catalytic activity for the reduction of 4‐nitrophenol by NaBH4, where Cu/Ag was found to be extremely active. This work indicates that a substrate electrode can be utilised in an interesting manner to make bimetallic nanostructures with enhanced catalytic activity.