Considerable interest has been shown in the development of biocomposite films for food packaging in recent years. In this study, biocomposite films based on polylactic acid (PLA) were prepared with varying levels of olive wood flour (OWF) (0, 1, 3, 5, and 10 wt%) using the solvent casting method. To achieve better dispersion, 2% ethanol was added during the casting of the biocomposite films. The effect of OWF content on the physicochemical and mechanical properties of the PLA films was investigated. Interaction between the OWF cellulose and the PLA matrix was revealed by FTIR spectroscopy analysis, and the addition of ethanol was found to be suitable for better dispersion of OWF, which resulted in decreased agglomeration rate in the biocomposites. The biocomposite films with the addition of 1% of OWF (OW1) exhibited the best dispersion, thermal stability, and tensile strength, with a gain of 31.07% (29.65 ± 6.6 MPa) and an increase in Young’s modulus of 15% (1199.18 ± 98 MPa). It was demonstrated that the properties of the PLA/OWF biocomposites make them suitable for green applications, including as film packaging for food products.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.