A technology for low-power high data-rate digital capsule endoscopy with human body communication (CEHBC) is presented in this paper. To transfer the image data stably with low power consumption, the proposed system uses three major schemes: Frequency selective digital transmission (FSDT) modulation with HBC, the use of an algorithm to select electrode pairs, and the LineSync algorithm. The FSDT modulation supports high-data rate transmission and prevents the signal attenuation effect. The selection algorithm of the electrode pair finds the best receiving channel. The LineSync algorithm synchronizes the data and compensates for data polarity during the long data transmission section between the capsule endoscope and the receiver. Because all the major functional blocks of the CEHBC transmitter can be implemented as digital logics, they can be easily fabricated using the field programmable gate array (FPGA). Moreover, this CEHBC transmitter can achieve low power-consumption and can support a relatively high data rate in spite of using its clock a few tens of MHz slower. The proposed CEHBC-TXD is the digital portion of the CEHBC transmitter that provides low-power (3.7 mW) and high data-rate (6 Mbps) performance while it supports a high-resolution image (480 × 480 byte) at 3.13 fps.

This paper presents an energy management integrated circuit for multiple energy harvesters in wireless body area network applications. The electrical power acquired from a single energy harvester around a human body is limited to micro watts, which is insufficient to drive a wearable electronic device. To increase this small amount, the energy from a number of harvesters has to be combined. By combining the energy from multiple distributed harvesters, each one producing negligible energy, significant energy for wearable devices can be obtained. In designing an energy management circuit for a wearable device, there are two issues to be resolved. The first is related to the power consumption of the circuit, and the second issue is related to the methods needed to manage the wide range of power that occurs as the energy input changes during harvesting. In this paper, an energy management circuit that resolves the two issues above is described. The circuit was integrated using 0.13 µm Taiwan Semiconductor Manufacturing Company complementary metal-oxide-semiconductor technology. The energy management circuit is designed to combine up to three sources of harvested energy with more than 90% operating efficiency over the entire power range of the energy harvested.

No abstract