Raman spectroscopy has been shown by various groups over the last two decades to have significant capability in discriminating disease states in bodily fluids, cells and tissues. Recent development in instrumentation, optics and manufacturing approaches has facilitated the design and demonstration of various novel in vivo probes, which have applicability for myriad of applications. This review focusses on key considerations and recommendations for application specific clinical Raman probe design and construction. Raman probes can be utilised as clinical tools able to provide rapid, non-invasive, real-time molecular analysis of disease specific changes in tissues. Clearly the target tissue location, the significiance of spectral changes with disease and the possible access routes to the region of interest will vary for each clinical application considered. This review provides insight into design and construction considerations, including suitable probe designs and manufacturing materials compatible with Raman spectroscopy.

The objective of this study is to use time-resolved (TR) Raman spectroscopy, spatially offset Raman spectroscopy (SORS), and a combination of these approaches to obtain high quality Raman spectra from materials hidden underneath an opaque layer. Both TR Raman and SORS are advanced techniques that allow for an increased relative selectivity of photons from deeper layers within a sample. Time-resolved detection reduces fluorescence background, and the selectivity for the second layer is improved. By combining this with spatially offset excitation we additionally increased selectivity for deeper layers. Test samples were opaque white polymer blocks of several mm thicknesses. Excitation was carried out with a frequency-doubled Ti:sapphire laser at 460 nm, 3 ps pulse width and 76 MHz repetition rate. Detection was either with a continuous-wave CCD camera or in time-resolved mode using an intensified CCD camera with a 250 ps gate width. The Raman photons were collected in backscatter mode, with or without lateral offset. By measuring the delay of the Raman signal from the second layer (polyethylene terephthalate/PET/Arnite), the net photon migration speeds through Teflon, polythene, Delrin and Nylon were determined. Raman spectra could be obtained from a second layer of PET through Teflon layers up to 7 mm of thickness. The ability to obtain chemical information through layers of diffusely scattering materials has powerful potential for biomedical applications.

The detection of explosives concealed behind opaque, diffusely scattering materials is a challenge that requires noninvasive analytical techniques for identification without having to manipulate the package. In this context, this study focuses on the application of time-resolved Raman spectroscopy (TRRS) with a picosecond pulsed laser and an intensified charge-coupled device (ICCD) detector for the noninvasive identification of explosive materials through several millimeters of opaque polymers or plastic packaging materials. By means of a short (250 ps) gate which can be delayed several hundred picoseconds after the laser pulse, the ICCD detector allows for the temporal discrimination between photons from the surface of a sample and those from deeper layers. TRRS was applied for the detection of the two main isomers of dinitrotoluene, 2,4-dinitrotoluene, and 2,6-dinitrotoluene as well as for various other components of explosive mixtures, including akardite II, diphenylamine, and ethyl centralite. Spectra were obtained through different diffuse scattering white polymer materials: polytetrafluoroethylene (PTFE), polyoxymethylene (POM), and polyethylene (PE). Common packaging materials of various thicknesses were also selected, including polystyrene (PS) and polyvinyl chloride (PVC). With the demonstration of the ability to detect concealed, explosives-related compounds through an opaque first layer, this study may have important applications in the security and forensic fields.