No abstract

Microbes have been exploited to produce a variety of high-value products such as enzymes, proteins, antibiotics, vitamins, etc. Use of oleaginous microorganisms for production of lipids (commonly called as single cell oils) commenced during the eighteenth century in Germany. Microbial lipids containing special fatty acids such as gamma-linolenic acid, arachidonic acid and docosahexaenoic acid are popularized and are now being produced in a large scale as neutraceuticals and food additives. In the past decade, microbial lipids have been considered as a promising feedstock for biodiesel production due to the contemporary issues on climate change, renewable energy and food security. Recently, various cheap raw materials and biowastes have been explored for economic microbial lipid production, which is considered as a solution to reduce biodiesel production cost and to achieve sustainable management of biowastes. Thus, microbial lipids produced from renewable biomass and biowastes as a second-generation biodiesel feedstock are a promising alternative for vegetable oils. In this review historical development of microbial lipids, biochemistry of lipid accumulation by oleaginous microorganisms, lipid production from various biowastes and renewable materials and cultivation methodologies are reviewed. Microbial lipids as a biodiesel feedstock are also reviewed and discussed.

Background Amylases produced by fungi during solid-state fermentation are the most widely used commercial enzymes to meet the ever-increasing demands of the global enzyme market. The use of low-cost substrates to curtail the production cost and reuse solid wastes are seen as viable options for the commercial production of many enzymes. Applications of α-amylases in food, feed, and industrial sectors have increased over the years. Additionally, the demand for processed and ready-to-eat food has increased because of the rapid growth of food-processing industries in developing economies. These factors significantly contribute to the global enzyme market. It is estimated that by the end of 2024, the global α-amylase market would reach USD 320.1 million (Grand View Research Inc., 2016). We produced α-amylase using Aspergillus oryzae and low-cost substrates obtained from edible oil cake, such as groundnut oil cake (GOC), coconut oil cake (COC), sesame oil cake (SOC) by solid-state fermentation. We cultivated the fungus using these nutrient-rich substrates to produce the enzyme. The enzyme was extracted, partially purified, and tested for pH and temperature stability. The effect of pH, incubation period and temperature on α-amylase production using A. oryzae was optimized. Box–Behnken design (BBD) of response surface methodology (RSM) was used to optimize and determine the effects of all process parameters on α-amylase production. The overall cost economics of α-amylase production using a pilot-scale fermenter was also studied. Results The substrate optimization for α-amylase production by the Box–Behnken design of RSM showed GOC as the most suitable substrate for A. oryzae, as evident from its maximum α-amylase production of 9868.12 U/gds. Further optimization of process parameters showed that the initial moisture content of 64%, pH of 4.5, incubation period of 108 h, and temperature of 32.5 °C are optimum conditions for α-amylase production. The production increased by 11.4% (10,994.74 U/gds) by up-scaling and using optimized conditions in a pilot-scale fermenter. The partially purified α-amylase exhibited maximum stability at a pH of 6.0 and a temperature of 55 °C. The overall cost economic studies showed that the partially purified α-amylase could be produced at the rate of Rs. 622/L. Conclusions The process parameters for enhanced α-amylase secretion were analyzed using 3D contour plots by RSM, which showed that contour lines were more oriented toward incubation temperature and pH, having a significant effect (p < 0.05) on the α-amylase activity. The optimized parameters were subsequently employed in a 600 L-pilot-scale fermenter for the α-amylase production. The substrates were rich in nutrients, and supplementation of nutrients was not required. Thus, we have suggested an economically viable process of α-amylase production using a pilot-scale fermenter.

Newer and novel laccases attract considerable attention due to its promising and valuable multiple applications in biotech industry. This present investigation documents, for the first time, on high level extracellular secretion of laccase (LccH) in newly isolated wood-degrading basidiomycete Hexagonia hirta MSF2. LccH was optimally active at 40°C in citrate phosphate buffer with a pH of 3.4. Optimized Cu2+ in glucose yeast extract (GY) medium enhanced the LccH production by H. hirta to 1944.44 U.ml-1. A further increment in LccH activity of 5671.30 U.ml-1 was achieved by the addition of a phenolic inducer, 2,5 Xylidine. Zymogram and sodium dodecyl sulfate–polyacrylamide gel electrophoresis (SDS–PAGE) analysis of LccH revealed that LccH is a monomer with a molecular mass of 66 kDa. MALDI-TOF-MS based peptide mass fingerprinting and comparative modeling of the amino acid sequence of LccH showed that it was closer to Trametes sp. AH28-2 (PDB: 3KW7) with 48% identity, 95% coverage, 0.011 alignment score and RMSD of 0.497Å. Crude LccH delignified lignocellulosic biomass such as wood and corncob, to a level of 28.6 and 16.5%, respectively. Such high level secretion, thermal and solvent stability of LccH make H. hirta a potential candidate not only for LccH production and biodelignification but also generation of lignin derived aromatic feed stock chemicals for industrial and environmental applications.

Laccases (EC 1.10.3.2) are a class of multi-copper oxidases that have industrial value. In the present study, forty-five isolates of wild mushrooms were screened for laccase production. Eight of the isolates exhibited exploitable levels of substrate oxidation capacity. Isolate BPSM10 exhibited the highest laccase activity of 103.50 U/ml. Internal Transcribed Spacer (ITS) rRNA gene sequencing was used to identify BPSM10 as Pleurotus pulmonarius . The response of BPSM10 to two nutritional media supplemented with various inducers was characterized and the results indicated that Malt Extract Broth (MEB) supplemented with Xylidine increased laccase production by 2.8× (349.5 U/ml) relative to the control (122 U/ml), while Potato Dextrose Broth (PDB) supplemented with xylidine increased laccase production by 1.9× (286 U/ml). BPSM10 has the ability to decolorize seven synthetic dyes in a liquid medium. Maximum decolorization was observed of malachite green (MG); exhibiting 68.6% decolorization at 100 mg/L. Fourier-transform infrared spectroscopy (FTIR) was employed to confirm the decolorization capacity. The present study indicates that P. pulmonarius BPSM10 has the potential to be used as a potent alternative biosorbent for the removal of synthetic dyes from aqueous solutions, especially in the detoxification of polluted water.