Phaeodactylum tricornutum is an interesting source of biomass to produce biocrude by hydrothermal liquefaction (HTL). Its biochemical composition, along with its biomass productivity, can be modulated according to this specific application by varying the photoperiod, the addition of CO2 or the variation of the initial nitrate concentration. The lab-scale culture allowed the production of a P. tricornutum biomass with high biomass and lipid productivities using a 18:6 h light:dark photoperiod and a specific CO2 injection. An initial concentration of nitrates (11.8 mM) in the culture was also essential for the growth of this species at the lab scale. The biomass generated in the scale-up photoreactor had acceptable biomass and lipid productivities, although the values were higher in the biomass cultivated at the lab scale because of the difficulty for the light to reach all cells, making the cells unable to develop and hindering their growth. The biocrudes from a 90-L cultivated microalga (B-90L) showed lower yields than the ones obtained from the biomass cultivated at the lab scale (B-1L) because of the lower lipid and high ash contents in this biomass. However, the culture scaling-up did not affect significantly the heteroatom concentrations in the biocrudes. A larger-scale culture is recommended to produce a biocrude to be used as biofuel after a post-hydrotreatment stage.

The aim of the present work was focused on optimising the yield and quality of the biocrude obtained by hydrothermal liquefaction (HTL) of Nannochloropsis gaditana. Temperature, reaction time and microalga concentration were the variables used to carry out an experimental factorial design with a central composite design. The responses chosen were the biocrude yield and the nitrogen and oxygen content in the biocrude phase. A second-order model was obtained to predict the responses as a function of these variables. Temperature is the most determining factor with a positive influence on biocrude yield. The maximum biocrude yield (42.3 ± 0.8 wt%) was obtained at 320 °C, 10 min of reaction and 10 wt% microalgae concentration, and the nitrogen and oxygen content significantly decreased with respect to their corresponding levels in the initial microalgal biomass. The HHV value of the biocrude was 35.7 MJ/kg. The biocrude was composed of 30% of linear and branched hydrocarbons.