No abstract

The indoor air quality (IAQ) is paramount to the existence of humans considering the amount of time spent indoors. The indoor pollutant levels may be 100 times the levels outdoors. The indoor pollutants need to be considered to enhance better IAQ. This study determined the emission factors of carbon monoxide (CO) emitted from a standby electricity generator (SEG). It evaluated the impacts of CO concentrations on indoor air quality and identified appropriate ways to mitigate the CO concentrations. The indoor CO concentration was determined by simulating a number of scenarios of SEG operated outdoor using a Simulation Tool Kit for Indoor Air Quality and Inhalation Exposure (IAQX) model. Hourly measurements of mean CO concentrations in the ambient environment and wind speed were conducted for four weeks in four field locations. The emission rate of CO from the standby electricity generator was measured. The CO concentration from SEG was 2.4289 × 10 4 mg/m 3 , a very high CO concentration. The CO emission factors ABOUT THE AUTHOR

Thermal treatment applications towards production of energy from raw and pre-treated municipal solid waste (MSW) are continuously growing context in contemporary waste-to-energy technology. The quality of MSW needs an improved analysis to enhance her choice of energy exploitation and environmental assessment of fly and bottom ashes associated with thermochemical conversions. The MSW were collected from municipal solid waste disposal facilities (MSWDF) in Cape Town to investigate heavy metals distributions in MSW. The MSW were pre-treated to improve the quality of MSW. The 7700 Series quadrupole ICP-MS solution method was used to determine concentrations and distributions of some heavy metals from MSWDF in Cape Town. This study further predicted distributions of heavy metals in fly and bottom ashes by a model. The results showed that accumulation of high concentrations of heavy metals in bottom ash residue could be a good remedy for heavy metals control. The heavy metals (especially Pb, Zn and Hg) emissions could be technically monitored and controlled from escaping to urban air-sheds atmosphere and prevent from their consequential secondary environmental and health implication.

No abstract

No abstract