No abstract

Binder jetting additive manufacturing (BJAM) is a comparatively low-cost process that enables manufacturing of complex and customizable metal parts. This process is applied to low-cost wateratomized iron powder with the goal of understanding the effects of printing parameters and sintering schedule on maximizing the green and sintered densities of manufactured samples respectively. The powder is characterized by using scanning electron microscopy (SEM) and particle size analysis (Camsizer X2). In the AM process, the effects of powder compaction, layer thickness and liquid binder level on green part density are investigated. Post-process heat treatment is applied to select samples, and suitable debinding parameters are studied by using thermogravimetric analysis (TGA). Sintering at various temperatures and durations results in densities of up to 91.3%. Image processing of x-ray computed tomography (μCT) scans of the samples reveals that porosity distribution is affected by powder spreading, and gradients in pore distribution in the sample are largely reduced after sintering. The resulting shrinkage ranges between 6.7  3.0% and 25.3  2.8%, while surface roughness ranges between 11.6  5.0 μm and 32.1  3.4 μm. The results indicate that the sintering temperature and time might be tailored to achieve target densities anywhere in the range of 64% and 91%, with possibly higher densities by increasing sintering time.

No abstract

No abstract

No abstract