Eudialytes are a nonconventional source for rare earth elements (REE). As the total REE content of eudialytes is relatively low, high-grade mineral concentrates have to be produced. The applicability of magnetic separation and direct selective flotation for the processing of eudialyte ore from Norra Kärr (Sweden) was tested. The eudialyte in the used sample contains around 4 % of REE. Magnetic separation is applicable for eudialyte ore processing. The higher the strength of the magnetic field, the higher the recovery. Recovery of around 81 % of REE was achieved in a two-stage process of rougher and scavenger at a mass reduction of 48 %. The concentrate grade of around 0.76 % REE is not sufficient for further hydrometallurgical processing steps. A newly developed reagent regime for the direct selective flotation of eudialyte from eudialyte ore was tested with different samples. The regime consists of oxalic acid and sodium hexametaphosphate as depressants and a mixture of mono/di phosphoric acid esters as collector, at a pH below 4. This new method proved applicable for raw ore as well as magnetic preconcentrate. Concentrates with grades of around 2 % R Y, Ce, La were produced.

Vanadium has been strongly moving into focus in the last decade. Due to its chemical properties, vanadium is vital for applications in the upcoming renewable energy revolution as well as usage in special alloys. The uprising demand forces the industry to consider the exploration of less attractive sources besides vanadiferous titanomagnetite deposits, such as lead vanadate deposits. Mineral processing and metallurgical treatment of lead vanadate deposits stopped in the 1980s, although the deposits contain a noteworthy amount of the desired resource vanadium. There has been a wide variety of research activities in the first half of the last century, including density sorting and flotation to recover concentrates as well as pyro- and hydrometallurgical treatment to produce vanadium oxide. There have been ecological issues and technical restrictions in the past that made these deposits uninteresting. Meanwhile, regarding the development of mineral processing and metallurgy, there are methods and strategies to reconsider lead vanadates as a highly-potential vanadium resource. This review does not merely provide an overview of lead vanadate sources and the challenges in previous mechanical and metallurgical processing activities, but shows opportunities to ensure vanadium production out of primary sources in the future.

Very often, the production of silver causes devastating environmental issues, because of the use of toxic reagents like cyanide and mercury. Due to severe environmental damage caused by humans in the last decades, the social awareness regarding the sustainable production processes is on the rise. Terms like "sustainable" and "green" in product descriptions are becoming more and more popular and producers are forced to satisfy the rising environmental awareness of their customers. Within this work, an alternative environmental sound silver recovery process was developed for a vein type silver ore from Mina Porka, Bolivia. A foregoing characterization of the input material reveals its mineral composition. In the following mineral processing, around 92.9% silver was concentrated by separating 59.5 wt. % of non-silver minerals. Nitric acid leaching of the generated concentrate enabled a silver recovery of up to 98%. The dissolved silver was then separated via copper cementation to generate a metallic silver product of >99% purity. Summarizing all process steps, a silver yield of 87% was achieved in lab scale. A final upscaling trial was conducted to prove the process' robustness. Within this trial, almost 4 kg of metallic silver with a purity of higher than 99.5 wt. % was produced.

The renewable energy revolution calls for high-performing materials and makes metallic compounds like lithium, cobalt, nickel and vanadium more and more critical. Innovations contribute to inventions and developments like vanadium redox flow batteries for large‑scale energy storage systems with numerous technological advantages. Potential shortages of vanadium and its sources will contribute to turbulence in vanadium pricing. Nowadays, main sources and production sites of vanadium are located in Russia, China and South Africa. About 85% of vanadium applications are ferroalloys and high-performance alloys, which make production and price of vanadium dependent on the iron ore market. Partial covering of a potential vanadium demand may be achieved by an exploitation of lead vanadate ore deposits as alternative vanadium source. In the present work, the processing of a lead vanadate ore, mainly containing vanadinite and descloizite was investigated. Based on ore characterizations and preliminary beneficiation tests, a flowsheet was developed to design a small-scale processing plant, including comminution, dewatering and gravity separation. Preliminary laboratory tests and samples from the small-scale processing plant show promising results for the recovery of vanadium in a lead vanadate concentrate with a grade of 12 to 16% V2O5 and a recovery of 68 to 75%.

Eudialyte ores from Norra Kärr (Sweden) and Kringlerne (Greenland) are considered a potential source of rare-earth elements (REE) for the development of a sustainable REE industry outside China. Magnetic separation is successfully applicated to recover eudialyte as a magnetic fraction. In the case of the Norra Kärr deposit, up to 20% of the REE and up to 40% of the Zr are lost during mineral processing in the non-magnetic fraction. Zr and REE are associated with non-magnetic minerals such as catapleiite, low- or non-magnetic eudialyte species, and both their intergrowths. Besides zirconosilicates such as catapleiite and eudialyte, the non-magnetic fraction has valuable and already-liberated minerals such as alkali feldspars and nepheline, which should not be considered as tailings. In this investigation, a possible way to recover REE bearing zirconosilicates from the non-magnetic fraction using flotation is presented. First, a low-grade eudialyte concentrate (1.8% Zr, 0.94% REE) from ground ore was obtained using magnetic separation. The non-magnetic fraction was then treated using froth flotation, and a Zr-REE bearing product (9% Zr, 1.5% REE) was obtained as froth product. For this purpose, phosphoric acid esters were used as selective collectors for zirconosilicates at a pH between 3.5 and 4.5. The reagent regime could be proposed not only to recover Zr- and REE-bearing minerals, but also simultaneously to remove Fe, Ti, and other colored impurities from the nepheline-feldspar product and to minimize the tailings volume.