Various iron(III) oxide catalysts were prepared by controlled decomposition of a narrow layer (ca. 1 mm) of iron(II) oxalate dihydrate, FeC(2)O(4).2H(2)O, in air at the minimum conversion temperature of 175 degrees C. This thermally induced solid-state process allows for simple synthesis of amorphous Fe(2)O(3) nanoparticles and their controlled one-step crystallization to hematite (alpha-Fe(2)O(3)). Thus, nanopowders differing in surface area and particle crystallinity can be produced depending on the reaction time. The phase composition of iron(III) oxides was monitored by XRD and (57)Fe Mössbauer spectroscopy including in-field measurements, providing information on the relative contents of amorphous and crystalline phases. The gradual changes in particle size and surface area accompanying crystallization were evaluated by HRTEM and BET analysis, respectively. The catalytic efficiency of the synthesized nanoparticles was tested by tracking the decomposition of hydrogen peroxide. The obtained kinetic data gave an unconventional nonmonotone dependence of the rate constant on the surface area of the samples. The amorphous nanopowder with the largest surface area of 401 m(2) g(-1) revealed the lowest catalytic efficiency, while the highest efficiency was achieved with the sample having a significantly lower surface area, 337 m(2) g(-1), exhibiting a prevailing content of crystalline alpha-Fe(2)O(3) phase. The obtained rate constant, 26.4 x 10(-3) min(-1) (g/L)(-1), is currently the highest value published. The observed rare catalytic phenomenon, where the particle crystallinity prevails over the surface area effects, is discussed with respect to other processes of heterogeneous catalysis.

Despite demonstrating potential for environmental remediation and biomedical applications, the practical environmental applications of autonomous self-propelled micro-/nanorobots have been limited by the inability to fabricate these devices in large (kilograms/tons) quantities. In view of the demand for large-scale environmental remediation by micro-/nanomotors, which are easily synthesized and powered by nontoxic fuel, we have developed bubble-propelled Fe(0) Janus nanomotors by a facile thermally induced solid-state procedure and investigated their potential as decontamination agents of pollutants. These Fe(0) Janus nanomotors, stabilized by an ultrathin iron oxide shell, were fuelled by their decomposition in citric acid, leading to the asymmetric bubble propulsion. The degradation of azo-dyes was dramatically increased in the presence of moving self-propelled Fe(0) nanomotors, which acted as reducing agents. Such enhanced pollutant decomposition triggered by biocompatible Fe(0) (nanoscale zero-valent iron motors), which can be handled in the air and fabricated in ton quantities for low cost, will revolutionize the way that environmental remediation is carried out.

We report on new magnetic bimetallic Fe-Ag nanoparticles (NPs) which exhibit significant antibacterial and antifungal activities against a variety of microorganisms including disease causing pathogens, as well as prolonged action and high efficiency of phosphorus removal. The preparation of these multifunctional hybrids, based on direct reduction of silver ions by commercially available zerovalent iron nanoparticles (nZVI) is fast, simple, feasible in a large scale with a controllable silver NP content and size. The microscopic observations (transmission electron microscopy, scanning electron microscopy/electron diffraction spectroscopy) and phase analyses (X-ray diffraction, Mössbauer spectroscopy) reveal the formation of Fe₃O₄/γ-FeOOH double shell on a "redox" active nZVI surface. This shell is probably responsible for high stability of magnetic bimetallic Fe-Ag NPs during storage in air. Silver NPs, ranging between 10 and 30 nm depending on the initial concentration of AgNO₃, are firmly bound to Fe NPs, which prevents their release even during a long-term sonication. Taking into account the possibility of easy magnetic separation of the novel bimetallic Fe-Ag NPs, they represent a highly promising material for advanced antimicrobial and reductive water treatment technologies.

Controlled decomposition of FeC2O4·2H2O in air at 175°C allows the simple synthesis of amorphous Fe2O3 nanoparticles and their controlled one-step crystallization to α-Fe2O3 (hematite). Depending on the reaction time, nanopowders differing in surface area and particle crystallinity are prepared. The samples are characterized by XRD, HRTEM, SAED, and 57 Fe Moessbauer spectroscopy, and their catalytic activity in the decomposition of H2O2 is studied. The amorphous nanopowder with the largest surface area shows the lowest catalytic efficiency, while the highest efficiency is achieved with a sample having a significantly lower surface area, exhibiting a prevailing content of crystalline α-Fe2O3 phase. -(HERMANEK, M.; ZBORIL*, R.; MEDRIK, I.; PECHOUSEK, J.; GREGOR, C.; J.

A facile approach for the synthesis of magnetite microspheres with flower-like morphology is reported that proceeds via the reduction of iron(III) oxide under a hydrogen atmosphere. The ensuing magnetic catalyst is well characterized by XRD, FE-SEM, TEM, N2 adsorption-desorption isotherm, and Mössbauer spectroscopy and explored for a simple yet efficient transfer hydrogenation reduction of a variety of nitroarenes to respective anilines in good to excellent yields (up to 98%) employing hydrazine hydrate. The catalyst could be easily separated at the end of a reaction using an external magnet and can be recycled up to 10 times without any loss in catalytic activity.