Wire-array Z-pinch implosion experiments begin with wire heating, explosion, and plasma formation phases that are driven by an initial 50–100 ns, 0–1 kA/wire portion of the current pulse. This paper presents expansion rates for the dense, exploding wire cores for several wire materials under these conditions, with and without insulating coatings, and shows that these rates are related to the energy deposition prior to plasma formation around the wire. The most rapid and uniform expansion occurs for wires in which the initial energy deposition is a substantial fraction of the energy required to completely vaporize the wire. Conversely, wire materials with less energy deposition relative to the vaporization energy show complex internal structure and the slowest, most nonuniform expansion. This paper also presents calibrated radial density profiles for some Ag wire explosions, and structural details present in some wire explosions, such as foam-like appearance, stratified layers and gaps.

No abstract

Magnetized Liner Inertial Fusion (MagLIF) [1] is a concept that involves using a pulsed electrical current to implode an initially-solid, cylindrical metal tube (liner) filled with preheated and magnetized fusion fuel. One-and two-dimensional simulations predict that if sufficient liner integrity can be maintained throughout the implosion, then significant fusion yield (>100 kJ) is possible on the 25-MA, 100-ns Z accelerator. The greatest threat to the liner integrity is the Magneto-Rayleigh-Taylor (MRT) instability, which first develops on the outer liner surface, and then works its way inward toward the inner surface throughout the implosion. Two-dimensional simulations predict that a thick liner, with R outer /∆R=6, should be robust enough to keep the MRT instability from overly disrupting the fusion burn at stagnation. This talk will present the first experiments designed to study a thick, MagLIF-relevant liner implosion through to stagnation on Z [2]. The use of beryllium for the liner material enabled us to obtain penetrating monochromatic (6151±0.5 eV) radiographs that reveal information about the entire volume of the imploding liner. This talk will also discuss experiments that investigated Z's pulseshaping capabilities to either shock-or shocklessly-compress the imploding liners [3], as well as our most recent experiments that used 2-micron-thick aluminum sleeves to provide high-contrast tracers for the positions and states of the inner surfaces of the imploding beryllium liners. The radiography data to be presented provide stringent constraints on the simulation tools used by the broader high energy density physics and inertial confinement fusion communities, where quantitative areal density measurements, particularly of convergent fusion targets, are relatively scarce. We will also present power-flow tests of the MagLIF load hardware as well as new micro-B-dot measurements of the azimuthal drive magnetic field that penetrates the initially vacuum filled interior of the liner during the implosion.

Substantial increases are reported in the expansion rates of exploding, dense wire cores under conditions simulating the prepulse phase of wire array z-pinch experiments [R. B. Spielman et al., Phys. Plasmas 5, 2105 (1998)] using wires with insulating coatings. The insulation apparently allows additional wire heating by delaying the formation of plasma around the wires. Once plasma is formed it terminates significant current flow in the residual wire cores. This effect is demonstrated for 25-μm diameter W and 25-μm diameter Ag wires.

A novel technique involving radial foil explosions can produce high energy density plasmas. A current flows radially inward in a 5 μm thin aluminum foil from a circular anode, which contacts the foil on its outer rim, to the cathode, which connects to the foil at its geometrical center. When using small “pin” cathodes (∼1 mm in diameter) on a medium size pulsed-current generator such as the Cornell Beam Research Accelerator, the central magnetic field approaches 400 T, yielding magnetic pressures larger than 0.5 Mbar. While the dynamics is similar to radial wire arrays, radial foil discharges have very distinct characteristics. First a plasma jet forms, with densities near 5×1018 cm−3. J×B forces lift the foil upward with velocities of ∼200 km/s. A plasma bubble with electron densities superior to 5×1019 cm−3 then develops, surrounding a central plasma column, carrying most of the cathode current. X-ray bursts coming from the center of this column were recorded at 1 keV photon energy. As the magnetic bubble explodes, ballistic plasma projectiles form and escape with velocities exceeding 300 km/s. Laser shadowgraphy and interferometry, gated extreme ultraviolet imaging and miniature Bdot probes are used to investigate the magnetohydrodynamics properties of such configurations.