ABSTRACT:The federal governments of Germany endeavour to create a harmonized 3D building data set based on a common application schema (the AdV-CityGML-Profile). The Bavarian Agency for Digitisation, High-Speed Internet and Surveying has launched a statewide 3D Building Model with standardized roof shapes for all 8.1 million buildings in Bavaria. For the acquisition of the 3D Building Model LiDAR-data or data from Image Matching are used as basis in addition with the building ground plans of the official cadastral map. The data management of the 3D Building Model is carried out by a central database with the usage of a nationwide standardized CityGML-Profile of the AdV. The update of the 3D Building Model for new buildings is done by terrestrial building measurements within the maintenance process of the cadaster and from image matching. In a joint research project, the Bavarian State Agency for Surveying and Geoinformation and the TUM, Chair of Geoinformatics, transformed an AdV-CityGML-Profilebased test data set of Bavarian LoD2 building models into an INSPIRE-compliant schema. For the purpose of a transformation of such kind, the AdV provides a data specification, a test plan for 3D Building Models and a mapping table. The research project examined whether the transformation rules defined in the mapping table, were unambiguous and sufficient for implementing a transformation of LoD2 data based on the AdV-CityGML-Profile into the INSPIRE schema. The proof of concept was carried out by transforming production data of the Bavarian 3D Building Model in LoD2 into the INSPIRE BU schema. In order to assure the quality of the data to be transformed, the test specifications according to the test plan for 3D Building Models of the AdV were carried out. The AdV mapping table was checked for completeness and correctness and amendments were made accordingly.