The importance of natural fiber reinforced composites is rapidly developing both in terms of engineering application and research field. The aim of this investigation is conducting an experiment to obtain the water absorption, physical and Mechanical properties of hybrid composite was fabricated from (False Banana Fiber) FBF and (Sisal Fiber) SF through general purpose (GP) resin-hardener mixture. The samples fabrication procedure was carried out by varying FBF and SF weight ratio to see its effect of mechanical and physical properties. Three samples (FBF: SF) i.e., 1:1 ratio, 3:1 ratio and 1:3 ratio with ply orientation as the reinforcement material. Then, tensile strength, compression strength, flexural strength water absorption percentage and density was conducted according to ISO and ASTM standards. The results show that the overall tensile strength shows a 1:3 ratio have shown 69 MPa which are higher than 1:1 ratio and 3:1 ratio. 3:1 ratio. In a compression strength test also 12.30 MPa which was higher result is obtained from 3:1 ratio. For both flexural(bending) strength and water absorption (for ordinary tap water and rainwater) test 380 MPa and (2.64 % and 3.07 %) respectively resulted, which are relatively less than from 1:1 ratio and 3:1ratio.