No abstract

No abstract

The difficulty to estimate the mechanical properties of the tympanic membrane (TM) is a limitation to understand the sound transmission mechanism. In this paper, based on finite element calculations, the sensitivity of the human hearing system to these properties is evaluated. The parameters that define the bending stiffness properties of the membrane have been studied, specifically two key parameters: Young's modulus of the tympanic membrane and the thickness of the eardrum. Additionally, it has been completed with the evaluation of the presence of an initial prestrain inside the TM. Modal analysis is used to study the qualitative characteristics of the TM comparing with vibration patterns obtained by holography. Higher-order modes are shown as a tool to identify these properties. The results show that different combinations of elastic properties and prestrain provide similar responses. The presence of prestrain at the membrane adds more uncertainty, and it is pointed out as a source for the lack of agreement of some previous TM elastic modulus estimations.

This paper is part of a research line focused on the reduction of the use of cement in the industry. In this work, the study of work methodologies for the manufacture of green cementitious grout mixtures is studied. Grout is widely used in construction and it requires an important use of raw materials. On the other hand, the steel industry faces the problem of the growing generation of slag wastes due to the increase in steel manufacturing. The green grout aims to achieve the dual objective of reducing the demand for cement and improve the slag waste valorization. Slag is not introduced as an aggregate but through the direct replacement of cement and no additives. The research seeks a product where we can use steel slag intensively, guaranteeing minimum resistance and workability. Results with substitutions between a 25% to 50% and water/cement ratio of 1 are presented. In particular, the suitability of different slags (two Ladle Furnace Slag (LFS) and one Blast Furnace Slag (GGBS)) in the quality of the final product are analyzed. The feasibility of replacing cement with slag and the importance of the origin and pretreatment are highlighted.

No abstract