No abstract

A simple subgrid turbulent diffusion model based on an analogy to the von Neumann-Richtmyer artificial viscosity is explored for use in modelling mixing in turbulent stratified shear flow. The model may be more generally applicable to multicomponent turbulent hydrodynamics and to subgrid turbulent transport of momentum, composition and energy. As in the case of the von Neumann artificial viscosity and many subgrid-scale models for large-eddy simulation, the turbulent diffusivity explicitly depends on the grid size and is not based on a quantitative model of the unresolved turbulence. In order to address the issue that it is often not known a priori when and where a flow will become turbulent, the turbulent diffusivity is set to zero when the flow is expected to be stable on the basis of a Richardson/Rayleigh-Taylor stability criterion, in analogy to setting the von Neumann artificial viscosity to zero in expanding flows. One-dimensional predictions of this model applied to a simple shear flow configuration are compared to those obtained using a K-e model. The density and velocity profiles predicted by both models are shown to be very similar.

Purpose: This paper studies the regions of parameter space of engineering design in which performance is sensitive to design parameters. Some of these parameters (for example, the dimensions and compositions of components) constitute the design, but others are intrinsic properties of materials or Nature. The paper is concerned with narrow regions of parameter space, "cliffs", in which performance (some measure of the final state of a system, such as ignition or non-ignition of a flammable gas, or failure or non-failure of a ductile material subject to tension) is a sensitive function of the parameters. In these regions performance is also sensitive to uncertainties in the parameters. This is particularly important for intrinsically indeterminate systems, those whose performance is * email:katz@wuphys.wustl.edu, 1 not predictable from measured initial conditions and is not reproducible.Design/methodology/approach: We develop models of ignition of a flammable mixture and of failure in plastic flow under tension. We identify and quantify cliffs in performance as functions of the design parameters. These cliffs are characterized by large partial derivatives of performance parameters with respect to the design parameters and with respect to the uncertainties in the model. We calculate and quantify the consequences of small random variations in the parameters of indeterminate systems.Findings: We find two qualitatively different classes of performance cliffs. In one class, performance is a sensitive function of the parameters in a narrow range that separates wider ranges in which it is insensitive. In the other class, the final state is not defined for parameter values outside some range, and performance is a sensitive function of the parameters as they approach their limiting values. We find that sensitivity of performance to control (design) parameters implies that it is also sensitive to other parameters, some of which may not be known, and to uncertainties of the initial state that are not under the control of the designer. Near or on a cliff performance is degraded. It is also less predictable and less reproducible.Practical implications: Frequently, design optimization or cost minimization leads to choices of engineering design parameters near cliffs. The sensitivity of performance to uncertainty that we find in those regimes implies that caution and extensive empirical experience are required to assure reliable functioning. Because cliffs are defined as behavior on the threshold of failure, this is a reflection of the tradeoff between optimization and margin of safety, and implies the importance of ensuring that margins and uncertainties are quantified. The implications extend far beyond the model systems we consider to engineering systems in general.Originality/value: Many of these considerations have been part of the informal culture of engineering design, but they were not formalized until the methodology of "Quantification of Margins and Uncertainty" was developed in recent years. Although this met...