It is known that the NBI ion losses may pose a problem to the Wendelstein 7-X first wall, but the so-far utilized wall models had insufficient details for reproducing the locations and magnitude of the hot-spots. This study aims to exhaustively analyse the detailed wall loads in the reference magnetic configurations and in various plasma scenarios. The goal is to pinpoint the endangered plasma facing components and to calculate heat loads to them in preparation for the first NBI operations. This study can be used to prepare monitoring of the heat loads and paves the way to future search of improved configurations.

The TJ-II stellarator neutral-beam injection (NBI) system, vacuum vessel and magnetic configuration have been included in the orbit-following Monte Carlo code ASCOT5 to simulate neutral-beam heating and current drive for high-density NBI plasmas. Co- and counter-injection beams are simulated separately. A scan in both electron density and temperature is carried out within the range of values corresponding to realistic high-density NBI plasmas, for which a low level of fast-ion losses due to charge-exchange reactions is expected, since the version of ASCOT5 used in the paper does not include such processes. The rest of the kinetic profiles (ion temperature, radial electric field and effective charge) are kept fixed. The initial distribution of markers shows that the amount of available power in the plasma carried by the beam ions depends slightly on the electron temperature and on the injection direction (co/counter). The steady-state fast-ion distribution function is obtained and used to calculate the three-dimensional fast-ion density, the neutral-beam driven current and the amount of power deposited to the plasma in the two injection scenarios. These three quantities are higher in the counter-injected case due to a lower amount of promptly lost particles. The neutral-beam current drive has been calculated using the fast-ion beam current given by ASCOT5 and the electron return current, which is computed with the analytic solution of the drift kinetic equation for electrons in the presence of fast ions in the low-collisionality regime. Neither the calculated fast-ion density nor the neutral-beam current drive are flux functions, in consistency with the fact that fast-ion drift surfaces and flux surfaces are generally not aligned.

A : The first fast ion experiments in Wendelstein 7-X were performed in 2018. They are one of the first steps in demonstrating the optimised fast ion confinement of the stellarator. The fast ions were produced with a neutral beam injection (NBI) system and detected with infrared cameras (IR), a fast ion loss detector (FILD), fast ion charge exchange spectroscopy (FIDA), and post-mortem analysis of plasma facing components.The fast ion distribution function in the plasma and at the wall is being modelled with the ASCOT suite of codes. They calculate the ionisation of the injected neutrals and the consecutive slowing down process of the fast ions. The primary output of the code is the multidimensional fast ion distribution function within the plasma and the distribution of particle hit locations and velocities on the wall. Synthetic measurements based on ASCOT output are compared to experimental results to assess the validity of the modelling.This contribution presents an overview of the various fast ion measurements in 2018 and the current modelling status. The validation and data-analysis is on-going, but the wall load IR modelling already yield results that match with the experiments.

No abstract

Neutron production rates in fusion devices are determined not only by the kinetic profiles but also the fast ion slowing-down distributions. In this work, we investigate the effect of magnetic configuration on neutron production rates in future deuterium plasmas in the Wendelstein 7-X stellarator. The neutral beam injection, beam and triton slowing-down distributions, and the fusion reactivity are simulated with the ASCOT suite of codes. The results indicate that the magnetic configuration has only a small effect on the production of 2.45 MeV neutrons from thermonuclear and beam-target fusion. The 14.1 MeV neutron production rates were found to be between 1.49 × 1012 and 1.67 × 10 12   s − 1 , which is estimated to be sufficient for a time-resolved detection using a scintillating fiber detector, although only in high-performance discharges.