A method of determining the oil consumption rate of combustion engines is presented. It is based on labelling the individual oil fractions of engine oil with radioactive bromine isotope82 Br and on the quantitative absorption of radioactive bromine compounds in the exhaust gas in an aqueous solution of nitric acid and silver nitrate. The advantages of this method are that the oil that is consumed in the exhaust gas can be directly measured, without the fluctuating amounts of oil in the sump influencing the result, and the behaviour of the individual components of the oil in the consumption process can be determined. The test is quick, only twenty minutes being required to detect oil consumption at one operating point; and with a single labelling, the oil consumption at a great number of working engine points can be measured 82 Br has a short half‐life of only 36 h, so that compliance with radiation protection measures is inexpensive and investigations can be carried out using a conventional testing device. As part of the research project, a study was made of the influence of different base oil types, with and without polymer additives, on consumption. Results showed that Noack evaporation loss correlated with oil consumption only with boiling fractions of exactly the same base oil, and not with different, in particular synthetic, base oils; that polymer additives (VI improvers) significantly reduced the rate of oil consumption; and that the polymer additive and the type of base oil both had more influence on oil consumption than viscosity.