The chloromethyl groups have been introduced into commercial S/DVB copolymer matrixes via interpenetrating polymer networks (IPN) synthesis. The procedure involves impregnation of the Amberlite XAD‐4 adsorbent, with use of the vinylbenzyl chloride (VBC) and divinylbenzene (DVB) monomers mixture, and suspension polymerization process. The syntheses were evaluated by FT‐IR spectra and SEM analyses and furthermore by chlorine content determination as well as characterization of porous structure by nitrogen adsorption at liquid nitrogen temperature. Designed synthesis approach allowed determining organic and water phases composition. Furthermore, impact of an excess of the organic phase removal method has been investigated. Basing on the obtained results it could be stated that the chloromethyl groups, derived from VBC monomer, were successfully introduced into the XAD‐4 structure. Captured SEM images revealed significant changes in the beads' surface morphology after polymerization processes. The presented studies reveal designed and executed synthesis processes, which involve the use of a proper water phase and excess of organic phase removal. Observed changes in the beads' morphology suggest that introduced functionalities are concentrated on the porous surface of the XAD‐4 adsorbent.

No abstract

No abstract

Microstructure, mechanical properties, corrosion resistance, and biocompatibility were studied for rapidly cooled 3 mm rods of Zr40Ti15Cu10Ni10Be25, Zr50Ti5Cu10Ni10Be25, and Zr40Ti15Cu10Ni5Si5Be25 (at.%) alloys, as well as for the reference 316L stainless steel and Ti-based Ti6Al4V alloy. Microstructure investigations confirm that Zr-based bulk metallic samples exhibit a glassy structure with minor fractions of crystalline phases. The nanoindentation tests carried out for all investigated composite materials allowed us to determine the mechanical parameters of individual phases observed in the samples. The instrumental hardness and elastic to total deformation energy ratio for every single phase observed in the manufactured Zr-based materials are higher than for the reference materials (316L stainless steel and Ti6Al4V alloy). A scratch tester used to determine the wear behavior of manufactured samples and reference materials revealed the effect of microstructure on mechanical parameters such as residual depth, friction force, and coefficient of friction. Electrochemical investigations in simulated body fluid performed up to 120 h show better or comparable corrosion resistance of Zr-based bulk metallic glasses in comparison with 316L stainless steel and Ti6Al4V alloy. The fibroblasts viability studies confirm the good biocompatibility of the produced materials. All obtained results show that fabricated biocompatible Zr-based materials are promising candidates for biomedical implants that require enhanced mechanical properties.