This preliminary study characterizes the bronze metalworking on a defensive settlement of the Lusatian culture in former Kamieniec (Chełmno land, Poland) as it is reflected through casting workshop recovered during recent excavations. Among ready products, the ones giving evidence of local metallurgy (e.g. casting moulds and main runners) were also identified. With the shrinkage cavities and dendritic microstructures revealed, the artifacts prove the implementing a casting method by the Lusatian culture metalworkers. The elemental composition indicates application of two main types of bronzes: Cu-Sn and Cu-Pb. Aside these main alloying additions, some natural impurities such as silver, arsenic, antimony and nickel were found which may be attributed to the origin of the ore and casting technology. The collection from Kamieniec was described in terms of its structure and composition. The investigations were made by means of the energy dispersive X-ray fluorescence spectroscopy (ED-XRF), scanning electron microscopy (SEM) coupled with an energy dispersive Xray analysis system (EDS) and optical microscopy (OM). In order to fingerprint either local or non-local profile of the alloys, the ED-XRF data-set was statistically evaluated using a factor analysis (FA).

This study characterizes the bronze jewellery recovered from the Lusatian culture urn-field in Mała Kępa (Chełmno land, Poland). Among many common ornaments (e.g. necklaces, rings, pins) the ones giving evidence of a steppe-styled inspiration (nail earrings) were also identified. With the dendritic microstructures revealed, the nail earrings prove the implementing of a lost-wax casting method, whereas some of the castings were further subjected to metalworking. The elemental composition indicates the application of two main types of bronze alloys: Cu-Sn and Cu-Sn-Pb. It has been established that the Lusatian metalworkers were familiar with re-melting the scrap bronze and made themselves capable of roasting the sulphide-rich ores. The collection from Mała Kępa has been described in terms of its structure and composition. The investigations were made by means of the energy dispersive X-ray fluorescence spectroscopy (ED-XRF), scanning electron microscopy (SEM) coupled with an energy dispersive X -ray analysis system (EDS) and optical microscopy (OM). In order to fingerprint an alloy profile of the castings with a special emphasis on the nail earrings, the data-set (ED-XRF, EDS) was statistically evaluated using multidimensional analyses (FA, DA).

No abstract

Gackowski J. 2016. The Younger Bronze Age and the beginning of the Iron Age in Chełmno land in the light of the evaluation of selected finds of metal products. Analecta Archaeologica Ressoviensia 11, 165-208 The article presents selected finds, both previously discovered and recent ones made of metal (bronze and iron), originating from Chełmno land and related with the settlement of the Lusatian population in the Younger Bronze Age and at the beginning of the Iron Age. Due to the discovery of several casting workshops and other traces of local bronze production, it is possible to assume that a certain selection of ornaments, weapons and tools was produced locally. However, the stylistic and utility models were always of supra-regional origin, for which many analogies can be found in the area of Kuyavia, Greater Poland and Silesia. Similar provenance has been noticed for iron objects discussed in the research.

This study reports the results of archaeometallurgical investigations performed on a complete two-part bronze casting mould discovered in the village of Elgiszewo (north Poland). The mould was part of the so-called Lusatian founder’s hoard deposited on the southern borders of the Chełmno group territory between 900 and 700 BC. The investigations involved the employment of spectral (ED XRF, SEM-EDS, X-ray)and microscopic (SEM-EDS, OM) analyses. The experimental casting of the model mould and socketed axe was carried out in this study as well. The chemical composition of the mould indicates the use of fire-refined (oxidized) fahlore scrap bronze, which could originally be composed of North Tyrolean copper fahlores. The metallographic results furthermore indicate deliberate tin abandonment by the Lusatian metalworker to maintain a thermal resistance of the mould during direct metal casting. Having analysed the results of the performed research, we can state that the mould from Elgiszewo was capable of ensuring direct casting and was in fact used by the Lusatian metalworkers for this purpose before the mould was finally deposited.