No abstract

SUMMARY Vibration control systems are being used increasingly worldwide to provide enhanced seismic protection for new and retrofitted buildings. This paper presents a new vibration control system on the basis of a seesaw mechanism with viscoelastic dampers. The proposed vibration control system comprises three parts: brace, seesaw member, and viscoelastic dampers. In this system, only tensile force appears in bracing members. Consequently, the brace buckling problem is negligible, which enables the use of steel rods for bracing members. By introducing pre‐tension in rods, long steel rods are applicable as bracing between the seesaw members and the moment frame connections over some stories. Seesaw mechanisms can magnify the damper deformation according to the damper system configuration. In this paper, first, the magnification factor, that is, the ratio of the damper deformation to the story drift, is delivered, which includes the rod deformation. Results of a case study demonstrate that the magnification factor of the proposed system is greater than unity for some cases. Seismic response analysis is conducted for steel moment frames with the proposed vibration control system. Energy dissipation characteristics are examined using the time‐history response results of energy. The maximum story drift angle distributions and time‐history response results of displacement show that the proposed system can reduce the seismic response of the frames effectively. Copyright © 2012 John Wiley & Sons, Ltd.

No abstract

SUMMARY Seesaw energy dissipation system (SEDS), a vibration control system used to provide enhanced seismic protection, has been proposed and investigated numerically. Because of its complicated arrangement, verification experiments are necessary to demonstrate the SEDS damping capacity. This paper presents the results of experimental investigation of the SEDS using fluid viscous dampers. Free vibration tests are conducted to demonstrate the SEDS damping capacity. Results of the free vibration test show that the SEDS has sufficient damping capacity for reduction of the seismic response of the frames. Parametric experimental investigations of the SEDS were conducted, the results of which demonstrate the effects of the system parameter on the damping capacity. Copyright © 2014 John Wiley & Sons, Ltd.

Recent devastating earthquakes worldwide pointed out the importance of seismic detailing and their influence on the observed damage and subsequent repairability of reinforced concrete buildings. Several studies and post-earthquake observations remarked the role of beam–column joints (BCJs) on the global building response and the effectiveness of transverse reinforcement in increasing the joint shear strength and the ultimate deformation. Although number of experimental and theoretical studies focused on the seismic response of BCJs, their mechanical behaviour is still a discussed topic. This resulted in number of design approaches available in worldwide code or standards that lead to different quantity of joint stirrups. This study focuses on the response of BCJs of a 10-story prototype building designed according to Japanese standards and tested in 2015 on the E-Defense shaking table. First the damage assessment at global (building) and local (joint) level is performed at increasing intensities and considering the building in the base slip and base fixed configurations. A refined numerical model is then developed and validated against global and local experimental results. Then, the joint stirrups are re-designed according to different international standards (ACI, EC8, NZS) and different numerical models are developed. The numerical results are then compared in terms of interstorey drift demand and joint shear strain. Finally, a comparison in terms of expected damage varying the design approach of joint stirrups is proposed.