Polyurethane foams, which are among the most widely used insulating materials, are generally fabricated by the chemical reaction between isocyanate and polyol‐containing chemical additives and blowing agents. Recently, many kinds of blowing agents have been used for the fabrication process of polyurethane foam, such as hydrochlorofluorocarbons (HCFCs) and chlorofluorocarbons (CFCs). However, issues have continuously arisen regarding the destruction of the ozone layer due to these compounds. In the present study, polyurethane foams are manufactured using a mixture of water blowing agents and hydrofluorocarbons (HFC‐365mfc). These samples are subjected to mechanical tests to investigate the effects of the blowing agents on the mechanical properties of the polyurethane foam within a temperature range of 25 to −163 °C. In addition, thermal and microstructural investigations are conducted depending on the content of the HFC‐365mfc. From the scanning electron microscopy observations, the sizes of the structure cells and the windows are found to decrease with the increase in HFC‐365mfc content. In addition, from the Fourier transform‐infrared spectroscopy observations, the chemical bonds that affect mechanical performance are found to be more distributed with the increase in HFC‐365mfc content.

In this study, glass bubble (GB) is added to polyurethane (PU) foams at different weight ratios—0, 0.25, 0.5, 0.75, and 1 wt% —to investigate the changes in the mechanical and thermal properties of the foam. By conducting several tests and measurements, the density, cell morphology, compressive strength, and thermal conductivity of the foam are studied. In particular, the effect of GB additives is examined by conducting compression tests at various temperatures (−163, −100, −40, and 20°C). Scanning electron microscopy and X‐ray microscope reveal that the foams exhibit higher stability below 0.5 wt%, which improves the thermal performance. On the other hand, the compressive strength of the foams increases for all weight ratios of GB, and it increases sharply at 0.75 wt%. In addition, the chemical interactions and the dispersion of additives in the PU matrix are investigated through Fourier transform infrared and X‐ray diffractions analysis. It is found that the synthesis of PU foams with GB nanoparticles is an efficient method for improving the mechanical properties and insulation performance of the foam for LNG insulation technology.