In this study, an optical method that allows simultaneous thickness measurements of two different layers distributed over a broad thickness range from several tens of nanometers to a few millimeters based on the integration of a spectroscopic reflectometer and a spectral-domain interferometer is proposed. Regarding the optical configuration of the integrated system, various factors, such as the operating spectral band, the measurement beam paths, and the illumination beam type, were considered to match the measurement positions and effectively separate two measurement signals acquired using both measurement techniques. Furthermore, for the thickness measurement algorithm, a model-based analysis method for high-precision substrate thickness measurements in thin-film specimens was designed to minimize the measurement error caused by thin films, and it was confirmed that the error is decreased significantly to less than 8 nm as compared to that when using a Fourier-transform analysis. The ability to undertake simultaneous thickness measurements of both layers using the proposed system was successfully verified on a specimen consisting of silicon dioxide thin film with nominal thicknesses of 100 nm and 150 nm and a 450 µm-thick silicon substrate, resulting in the exact separation between the two layers. From measurement uncertainty evaluation of a thin-film, a substrate in a thin-film specimen, and a single substrate, the uncertainties were estimated to be 0.12 nm for the thin-film, 0.094 µm for the substrate in a thin-film specimen, and 0.076 µm for the substrate. The measurement performance of thicknesses distributed on multi-scale was verified through comparative measurements using standard measurement equipment for several reference samples.

No abstract

We propose and realize a modified spectral-domain interferometer to measure the physical thickness profile and group refractive index distribution of a large glass substrate simultaneously. The optical layout was modified based on a Mach-Zehnder type interferometer, which was specially adopted to be insensitive to mechanical vibration. According to the measurement results of repeated experiments at a length of 820 mm along the horizontal axis, the standard deviations of the physical thickness and group refractive index were calculated to be 0.173 μm and 3.4 × 10(-4), respectively. To verify the insensitivity to vibration, the physical thickness values were monitored at a stationary point while the glass panel was swung at an amplitude exceeding 20 mm. The uncertainty components were evaluated, and the combined measurement uncertainty became 161 nm (k = 1) for a glass panel with a nominal thickness of 0.7 mm.

Smart devices have been fabricated based on design concept of multiple layer structures which require through silicon vias to transfer electric signals between stacked layers. Because even a single defect leads to fail of the packaged devices, the dimensions of the through silicon vias are needed to be measured through whole sampling inspection process. For that, a novel hybrid optical probe working based on optical interferometry, confocal microscopy and optical microscopy was proposed and realized for enhancing inspection efficiency in this report. The optical microscope was utilized for coarsely monitoring the specimen in a large field of view, and the other methods of interferometry and confocal microscopy were used to measure dimensions of small features with high speed by eliminating time-consuming process of the vertical scanning. Owing to the importance of the reliability, the uncertainty evaluation of the proposed method was fulfilled, which offers a practical example for estimating the performance of inspection machines operating with numerous principles at semiconductor manufacturing sites. According to the measurement results, the mean values of the diameter and depth were 40.420 µm and 5.954 µm with the expanded uncertainty of 0.050 µm (k = 2) and 0.208 µm (k = 2), respectively.

No abstract