Cymbal transducers are typically grouped and arranged in planar arrays. For projector arrays, a wide bandwidth on the transmitting voltage response (TVR) spectrum is required for better underwater communication and data transmission within a short time. The purpose of this study is to develop a wideband cymbal array by controlling the center-to-center (CTC) spacing between the cymbal transducers in the array. In the practical design of the array, due to the arrangement of elements in one layer, the minimum CTC spacing between the cymbals is constrained to the diameter of the cymbals in use. To overcome this limitation, we propose a new dual-layer array structure. Finite element analysis of the cymbal array showed that the bandwidth was generally inversely proportional to the CTC spacing. We explained the mechanism of this relationship using a theoretical analysis of the mutual radiation impedance between the cymbals in the array. Subsequently, we identified the optimum CTC spacing to achieve the widest possible bandwidth for the cymbal array. The validity of the wideband array design was verified through the fabrication and characterization of prototype arrays. We confirmed that the two-layered arrangement could significantly widen the bandwidth of the cymbal array while maintaining the TVR above a specified level.