MACAO stands for Multi Application Curvature Adaptive Optics. A similar concept is applied to fulfill the need for wavefront correction for several VLT instruments. MACAO-VLTI is one of these built in 4 copies in order to equip the Coude focii of the ESO VLT's. The optical beams will then be corrected before interferometric recombination in the VLTI (Very Large Telescope Interferometer) laboratory. MACAO-VLTI uses a 60 elements bimorph mirror and curvature wavefront sensor. A custom made board processes the signals provided by the wavefront detectors, 60 Avalanche Photo-diodes, and transfer them to a commercial Power PC CPU board for Real Time Calculation. Mirrors Commands are sent to a High Voltage amplifier unit through an optical fiber link. The tip-tilt correction is done by a dedicated Tip-tilt mount holding the deformable mirror. The whole wavefront is located at the Coude focus. Software is developed in house and is ESO compatible. Expected performance is a Strehl ratio sligthly under 60% at 2.2 micron for bright reference sources (star V<10) and a limiting magnitude of 17.5 (Strehl ~0.1). The four systems will be installed in Paranal successively, the first one being planned for June 2003 and the last one for June 2004.

FLAMES is the VLT Fibre Facility, installed and being commissioned at the Nasmyth A of UT2 (Kueyen Telescope). FLAMES has been built and assembled at the VLT telescope in about 4 years through an international collaboration between 10 institutes in 6 countries and 3 continents. It had first light with the fibre link to the red arm of UVES on April 1, and with the GIRAFFE spectrograph on July 3. We have not yet enough data to compare the observed vs. expected astronomical performances, although these first data are encouraging in many respects. We aim at proceeding soon with the remaining tests. Downloaded From: http://proceedings.spiedigitallibrary.org/ on 06/24/2016 Terms of Use: http://spiedigitallibrary.org/ss/TermsOfUse.aspx Proc. of SPIE Vol. 4841 1683 Downloaded From: http://proceedings.spiedigitallibrary.org/ on 06/24/2016 Terms of Use: http://spiedigitallibrary.org/ss/TermsOfUse.aspx

No abstract

Context. Optical interferometry is at a key development stage. The Very Large Telescope Interferometer (VLTI) has established a stable, robust infrastructure for long-baseline interferometry that is usable by general astronomical observers. The present second-generation instruments offer a wide wavelength coverage and improved performance. Their sensitivity and measurement accuracy lead to data and images of high reliability. Aims. We have developed the Multi AperTure mid-Infrared SpectroScopic Experiment (MATISSE) to access, for the first time, high resolution imaging in a wide spectral domain. Many front-line topics are explored with this new equipment, including: stellar activity and mass loss; planet formation and evolution in the gas and dust disks around young stars; and environment interaction and accretion processes around super massive black holes in active galactic nuclei (AGN). Methods. The instrument is a spectro-interferometric imager in the transmission windows called L, M, and N, from 2.8 to 13.0 microns, combining four optical beams from the VLTI's unit or auxiliary telescopes. Its concept, related observing procedure, data reduction, and calibration approach, is the product of 30 years of instrumental research and has benefitted from the expertise developed in the frame of the VLTI's first generation instruments. The instrument utilises a multi-axial beam combination that delivers spectrally dispersed fringes. The signal provides the following quantities at several spectral resolutions: photometric flux, coherent fluxes, visibilities, closure phases, wavelength differential visibilities and phases, and aperture-synthesis imaging. Results. This article provides an overview of the physical principle of the instrument and its functionalities. The motivation of the choice of the instrumental concept and the characteristics of the delivered signal are detailed with a description of the observing modes and of their performance limit. MATISSE offers four spectral resolutions in L&M bands, namely 30, 500, 1000 and 3400, and 30 and 220 in the N band, and it provides an angular resolution down to 3 mas for the shortest wavelengths. The MATISSE stand-alone sensitivity limits are 60 mJy in L and 300 mJy in N. The paper gives details of the sensitivity limits for the different measurables and their related precision criteria, considering telescope configurations and spectral resolutions. We also discuss the gain provided with the GRA4MAT fringe tracker. An ensemble of data and reconstructed images illustrate the first acquired key observations. Conclusions. The instrument has been in operation at Cerro Paranal, ESO, Chile, since 2018, and has been open for science use by the international community since April 2019. The first scientific results are being published now.

No abstract