Data on treatment of glucocorticoid-induced osteoporosis (GIO) in men are scarce. We performed a randomized, open-label trial in men who have taken glucocorticoids (GC) for ≥3 months, and had an areal bone mineral density (aBMD) T-score ≤ –1.5 standard deviations. Subjects received 20 μg/d teriparatide (n = 45) or 35 mg/week risedronate (n = 47) for 18 months. Primary objective was to compare lumbar spine (L1–L3) BMD measured by quantitative computed tomography (QCT). Secondary outcomes included BMD and microstructure measured by high-resolution QCT (HRQCT) at the 12th thoracic vertebra, biomechanical effects for axial compression, anterior bending, and axial torsion evaluated by finite element (FE) analysis from HRQCT data, aBMD by dual X-ray absorptiometry, biochemical markers, and safety. Computed tomography scans were performed at 0, 6, and 18 months. A mixed model repeated measures analysis was performed to compare changes from baseline between groups. Mean age was 56.3 years. Median GC dose and duration were 8.8 mg/d and 6.4 years, respectively; 39.1% of subjects had a prevalent fracture, and 32.6% received prior bisphosphonate treatment. At 18 months, trabecular BMD had significantly increased for both treatments, with significantly greater increases with teriparatide (16.3% versus 3.8%; p = 0.004). HRQCT trabecular and cortical variables significantly increased for both treatments with significantly larger improvements for teriparatide for integral and trabecular BMD and bone surface to volume ratio (BS/BV) as a microstructural measure. Vertebral strength increases at 18 months were significant in both groups (teriparatide: 26.0% to 34.0%; risedronate: 4.2% to 6.7%), with significantly higher increases in the teriparatide group for all loading modes (0.005 < p < 0.015). Adverse events were similar between groups. None of the patients on teriparatide but five (10.6%) on risedronate developed new clinical fractures (p = 0.056). In conclusion, in this 18-month trial in men with GIO, teriparatide showed larger improvements in spinal BMD, microstructure, and FE-derived strength than risedronate.
ObjectivesPhoton counting computed tomography (PCCT) might offer an effective spatial resolution that is significantly improved compared with conventional state-of-the-art computed tomography (CT) and even provide a microstructural level of detail similar to high-resolution peripheral CT (HR-pQCT). The aim of this study was to evaluate the volumetric effective spatial resolution of clinically approved PCCT as an alternative to HR-pQCT for ex vivo or preclinical high-resolution imaging of bone microstructure.Materials and MethodsThe experiment contained 5 human vertebrae embedded in epoxy resin, which were scanned 3 times each, and on 3 different clinical CT scanners: a PCCT (Naeotom Alpha), a dual-energy CT (Somatom Force [SF]), and a single-energy CT (Somatom Sensation 40 [S40]), all manufactured by Siemens Healthineers (Erlangen, Germany). Scans were performed with a tube voltage of 120 kVp and, to provide maximum scan performance and minimum noise deterioration, with exposures of 1500 mAs (SF), 2400 mAs (S40), and 4500 mAs (PCCT) and low slice increments of 0.1 (PCCT) and 0.3 mm (SF, S40). Images were reconstructed with sharp and very sharp bone kernels, Br68 and Br76 (PCCT), Br64 (SF), and B65s and B75h (S40). Ground truth information was obtained from an XtremeCT scanner (Scanco, Brüttisellen, Switzerland). Voxel-wise comparison was performed after registration, calibration, and resampling of the volumes to isotropic voxel size of 0.164 mm. Three-dimensional point spread- and modulation-transfer functions were calculated with Wiener’s deconvolution in the anatomical trabecular structure, allowing optimum estimation of device- and kernel-specific smoothing properties as well as specimen-related diffraction effects on the measurement.ResultsAt high contrast (modulation transfer function [MTF] of 10%), radial effective resolutions of PCCT were 10.5 lp/cm (minimum resolvable object size 476 μm) for kernel Br68 and 16.9 lp/cm (295 μm) for kernel Br76. At low contrast (MTF 5%), radial effective spatial resolutions were 10.8 lp/cm (464 μm) for kernel Br68 and 30.5 lp/cm (164 μm) for kernel Br76. Axial effective resolutions of PCCT for both kernels were between 27.0 (185 μm) and 29.9 lp/cm (167 μm). Spatial resolutions with kernel Br76 might possibly be still higher but were technically limited by the isotropic voxel size of 164 μm. The effective volumetric resolutions of PCCT with kernel Br76 ranged between 61.9 (MTF 10%) and 222.4 (MTF 5%) elements per cubic mm. Photon counting CT improved the effective volumetric resolution by factor 5.5 (MTF 10%) and 18 (MTF 5%) compared with SF and by a factor of 8.7 (MTF 10%) and 20 (MTF 5%) compared with S40. Photon counting CT allowed obtaining similar structural information as HR-pQCT.ConclusionsThe effective spatial resolution of PCCT in trabecular bone imaging was comparable with that of HR-pQCT and more than 5 times higher compared with conventional CT. For ex vivo samples and when patient radiation dose can be neglected, PCCT allows imaging bone microstructure at a precl...
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.