The Ripley Landslide is a small (0.04 km2), slow‐moving landslide in the Thompson River Valley, British Columbia, that is threatening the serviceability of two national railway lines. Slope failures in this area are having negative impacts on railway infrastructure, terrestrial and aquatic ecosystems, public safety, communities, local heritage and the economy. This is driving the need for monitoring at the site, and in recent years there has been a shift from traditional geotechnical surveys and visual inspections for monitoring infrastructure assets toward less invasive, lower cost, and less time‐intensive methods, including geophysics. We describe the application of a novel electrical resistivity tomography system for monitoring the landslide. The system provides near‐real time geoelectrical imaging, with results delivered remotely via a modem, avoiding the need for costly repeat field visits, and enabling near‐real time interpretation of the four‐dimensional electrical resistivity tomography data. Here, we present the results of the electrical resistivity tomography monitoring alongside field sensor‐derived relationships between suction, resistivity, moisture content and continuous monitoring single‐frequency Global Navigation Satellite System stations. Four‐dimensional electrical resistivity tomography data allows us to monitor spatial and temporal changes in resistivity, and by extension, in moisture content and soil suction. The models reveal complex hydrogeological pathways, as well as considerable seasonal variation in the response of the subsurface to changing weather conditions, which cannot be predicted through interrogation of weather and sensor data alone, providing new insight into the subsurface processes active at the site of the Ripley Landslide.

No abstract

Moisture-induced landslides are a global geohazard; mitigating the risk posed by landslides requires an understanding of the hydrological and geological conditions present within a given slope. Recently, numerous geophysical studies have been attempted to characterise slow-moving landslides, with an emphasis on developing geoelectrical methods as a hydrological monitoring tool. However, landslides pose specific challenges for processing geoelectrical data in long-term monitoring contexts as the sensor arrays can move with slope movements. Here we present an approach for processing long-term (over 8 years) geoelectrical monitoring data from an active slow-moving landslide, Hollin Hill, situated in Lias rocks in the southern Howardian Hills, UK. These slope movements distorted the initial setup of the monitoring array and need to be incorporated into a time-lapse resistivity processing workflow to avoid imaging artefacts. We retrospectively sourced seven digital terrain models to inform the topography of our imaging volumes, which were acquired by either Unmanned Aerial Vehicle (UAV)-based photogrammetry or terrestrial laser ranging systems. An irregular grid of wooden pegs was periodically surveyed with a global position system, from which distortions to the terrain model and electrode positions can be modelled with thin plate splines. In order to effectively model the time-series electrical resistivity images, a baseline constraint is applied within the inversion scheme; the result of the study is a time-lapse series of resistivity volumes which also incorporate slope movements. The workflow presented here should be adaptable for other studies focussed on geophysical/geotechnical monitoring of unstable slopes.